Portrait Projection (Vertical Orientation) - NEC PX602WL User Manual

Portrait projection (vertical orientation)

By using a safety cover (sold separately), the projector can be mounted
vertically to display computer images in portrait orientation.
If the safety cover is missing, the power will not turn on.
All screens, such as the on-screen menus, will be rotated in the counter-
clockwise direction.
The projector is equipped with a sensor to automatically detect the instal-
lation state.
Precautions during installation
• Please do not install the projector in a vertical orientation on top of the floor or table on its own. If not, the pro-
jector may fall over, resulting in injury, damage or malfunction.
• For vertical installation, install the projector with the intake vent (safety cover) facing downwards. A stand for
supporting the projector needs to be made for this purpose. In this case, the stand must be designed such that
the center of gravity of the projector is located well within the legs of the stand. If not, the projector may fall over
and result in injury, damage and malfunction.
• Do not obstruct the intake vent on the safety cover. The projector may otherwise overheat, causing fire and
malfunction.
NOTE:
• When using a safety cover, the power turns on only when the projector ventilation intake is facing down. If the intake vent faces
any other direction, the power will not turn on.
• If the projector is mounted vertically without a safety cover, the power will not turn on.
6. Installation and Connections
135