Download
Share
Print this page
Samsung SCB-5000PH User Manual
  1. Manuals
  2. Brands
  3. Samsung Manuals
  4. Digital Camera
  5. SCB-5000PH
  6. User manual

Samsung SCB-5000PH User Manual

Supreme resolution camera
Hide thumbs

Advertisement

Quick Links

Supreme Resolution Camera
User Manual
SCB-5000PH
SCB-5003PH

Advertisement

loading

Related Manuals for Samsung SCB-5000PH

Summary of Contents for Samsung SCB-5000PH

  • Page 1 Supreme Resolution Camera User Manual SCB-5000PH SCB-5003PH...
  • Page 2 Samsung Techwin. Disclaimer Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document, but no formal guarantee shall be provided. Use of this document and the subsequent results shall be entirely on the user’s own responsibility.
  • Page 3 Before operating the camera, confirm the camera model and correct input power voltage. To help you understand this manual thoroughly, we'll introduce our model description. ■ SCB-5000PH / SCB-5003PH SERIES • PAL MODEL SCB-5000PH SCB-5003PH ■ MODEL DESCRIPTION • SCB-5000XX _ _...
  • Page 4 safety information CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit.
  • Page 5 9. If this product fails to operate normally, contact the nearest service center. Never disassemble or modify this product in any way. (samsung is not liable for problems caused by unauthorized modifications or attempted repair.) 10.
  • Page 6 safety information FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions : 1) This device may not cause harmful interference, and 2) This device must accept any interference received including interference that may cause undesired operation.
  • Page 7 Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus Samsung Techwin cares for the environment at all product manufacturing stages to preserve the environment, and is taking a number of steps to provide customers with more environment-friendly products.The Eco mark represents...

  • Page 8: Table Of Contents

    contents inTroDuCTion Features Components and Accessories Overview Lens ConnECTion Connecting to Monitor Connecting to Power Control via RS-485 Interface Using Coaxial Communications CamEra oPEraTion Menu Configuration Menu Setup TroublEshooTing Troubleshooting sPECifiCaTions Specifications Dimension 8_ contents...

  • Page 9: Introduction

    Excellent sensitivity The built-in high sensitivity COLOR CMOS produces a clear image. - SCB-5000PH : 0.03Lux (F1.2, 50IRE), 0.001Lux (1sec, F1.2, 50IRE) 0.01Lux (F1.2, 30IRE), 0.0003Lux (1sec, F1.2, 30IRE) - SCB-5003PH Color : 0.03Lux (F1.2, 50IRE), 0.001Lux (1sec, F1.2, 50IRE) 0.01Lux (F1.2, 30IRE), 0.0003Lux (1sec, F1.2, 30IRE)
  • Page 10 Communication Coaxial and RS-485 communication methods are supported. (SCB-5000PH : Coaxial / SCB-5003PH : Coaxial , RS-485) - Coaxial Communications : Pelco Coaxitron - RS-485 Communications : Samsung-T, Samsung-E, PELCO-D, PELCO-P, BOSCH, HONEYWELL, VICON, PANASONIC, GE, AD y osD The camera’s OSD is complimented by 17 languages.
  • Page 11 oVErViEW front View Tripod mounting bracket screw hole : ❶ ` Used to fix the camera on a bracket. The screw sizes for this hole are as follows. 1/4"-20 UNC (20 THREAD) L:4.5mm±0.2mm (ISO standard), or 0.197" (ASA standard) back focus Control lever : It acquires margins for lens adjustments. lens adaptor : IInstall this if you use the lens.
  • Page 12 POWER VIDEO VIDEO sCb-5003Ph sCb-5000Ph function setup switch Display the menu on the screen and move the cursor to four directions to confirm ststus or after changing a selected item. Power lED : This lamp is lit when the camera is receiving power normally.
  • Page 13 lEns The lens is not supplied with this camera. Purchase a lens suitable for your environment. This camera accepts the auto iris lens and both C-and CS-mount lens. To use the functions of this camera effectively it is recommended that a DC type Auto Iris lens is used. Keep the lens surface clean, if it becomes contaminated with dirt or fingerprints the picture quality suffers.
  • Page 14 introduction 4. Fit the cover of the auto iris lens connector plug, remove the protective glass cover from the front of the camera, and fasten the auto iris lens by turning it clockwise. 5. After combining the lens, adjust the focus. When using a C/Cs-mount lens (sold separately) Before installing a lens, identify whether the lens to be installed is a C-Mount or CS-Mount.
  • Page 15 Use the lens connector shown in the following figure. If the dimensions of the connector are not correct, it may damage the camera, or the lens may not be installed firmly. If the lens is too heavy, the camera becomes unbalanced and there may be problems.

  • Page 16: Connection

    Only connect the cable when the power is turned off. ConnECTing To PoWEr You can connect power as shown in the following figure. y Use AC230V±10% power source For SCB-5000/5003PH. POWER POWER VIDEO VIDEO sCb-5003Ph sCb-5000Ph 16_ connection...

  • Page 17: Control Via Rs-485 Interface

    * RS-485 Communication establishment initial value Item Camera ID BAUD RATE UART MODE RET PKT Initial value 9600 8-NONE-1 ENABLE To control the camera by constructing an additional controller, use the SAMSUNG-T, SAMSUNG-E, PELCO-D, PELCO-P, BOSCH, HONEYWELL, VICON and PANASONIC, GE, AD protocol. English_17...

  • Page 18: Using Coaxial Communications

    connection using Coaxial CommuniCaTions y Coaxial Communications System y OSD Control method CAMERA CONTROLLER MENU/ENTER OSD KEY UP KEY JOYSTICK UP DOWN DOWN KEY JOYSTICK DOWN LEFT LEFT KEY JOYSTICK LEFT RIGHT RIGHT KEY JOYSTICK RIGHT ALARM NETWORK BACKUP ZOOM FREEZE BACKUP SEARCH...
  • Page 19 camera operation mEnu ConfiguraTion main sETuP BASIC DAY/NIGHT BACKLIGHT ● ● ● PROFILE INDOOR USER ● ● ● SSDR ● ● ● ● OUTDOOR ● INDOOR WHITE BAL ● AWC  SET MANUAL MERCURY ● ● ● BRIGHTNESS ● LENS ●...
  • Page 20 camera operation MAIN SETUP Select the function ▶ 1. PROFILE BASIC Change the status using the Function using the Function 2. SSDR Setup switch. Setup switch. 3. WHITE BAL 4. EXPOSURE 5. BACKLIGHT 6. SPECIAL 7. EXIT SAVE 1. Press the Function Setup switch. y Main SETUP menu is displayed on the monitor screen.
  • Page 21 If you select the traffic monitoring mode, the shutter will be set to 1/200 sec. Noise can be detected at night. ssDr (samsung super Dynamic range) If an object has a large variance between bright and dark areas, it will keep bright areas bright and make selected dark areas bright, so that the overall brightness can be maintained.
  • Page 22 camera operation White bal (White balance) Use the White Balance function to adjust the screen color. 1. When the SETUP menu screen is MAIN SETUP displayed, select ‘White Bal’ by 1. PROFILE BASIC using the Function Setup switch so 2. SSDR that the arrow indicates ‘White Bal’...
  • Page 23 - Manual : Select Manual Lens. SCB-5000PH does not support VIDEO. When using VIDEO lens, adjust the lens VR explained below first and set the focus using 'FOCUS ADJ' menu.
  • Page 24 camera operation y shuTTEr : You can select the shutter. - MIN : 1 ~ 1/12000 - MAX : 1/50 ~ 1/12000 - A.FLK : Select this when you experience picture flicker, this happen when there is a clash with the installed lighting frequency. The greater the shutter value the brighter the screen is but the more the residual images of objects there are.
  • Page 25 <WDR OFF> - RETURN : Return to the MAIN SETUP menu. SCB-5000PH does not support VIDEO. In WDR mode, the max/min shutter value is set to 1/2 to 1/480. In WDR mode, there can be noise between a bright and dark area.
  • Page 26 camera operation Depending on light conditions, unnatural changes or symptoms can occur on the screen so deactivate the user mode. sPECial 1. When the SETUP menu screen is SPECIAL SETUP displayed, select ‘SPECIAL’ by using DISPLAY ▶ 1. the Function Setup switch so that the COMM ADJ arrow indicates ‘SPECIAL’.
  • Page 27 RETURN ‘COMM ADJ’. Select a desired mode using the Function Setup switch. - PROTOCOL : Select the communication PROTOCOL. (SAMSUNG-T, SAMSUNG-E, PELCO-D, PELCO-P, BOSCH, HONEYWELL, VICON, PANASONIC, GE and AD) - CAM ID : Determines the camera's identification number (between 0 and 255).
  • Page 28 camera operation y imagE aDJ IMAGE SETUP ❶ If the SPECIAL menu screen is GAMMA 0.45 ▶ displayed, use the Function Setup PED LEVEL ---- ----  switch so that the arrow indicates COLOR GAIN ---- ----  ‘IMAGE ADJ’. 4.
  • Page 29 - auTo : The mode is switched AUTO SETUP to ’Color‘ in a normal BURST MODE ▶ environment, but switches DURATION NORMAL to ’B/W‘ mode when DWELL TIME 30 SEC ambient illumination is low. RETURN To set up the switching time for AUTO mode, press the Function Setup switch.
  • Page 30 - SEL POS/ XPOS/ YPOS : Adjust the size and position of the selected area. - RETURN : Return to the SPECIAL menu. y Dis (Digital image stabilizer) : This function mitigates any picture movement due to external factors such as wind. y ViDEo analYTiCs(sCb-5000Ph) ❶ If the SPECIAL menu screen is VIDEO ANALYTICS displayed, use the Function Setup ▶...
  • Page 31 y SENSITIVITY : Set the sensitivity to tampering detection. y ALARM OUT : Outputting of detection signals can be set. OSD : Display signals on the screen. RETURN : Return to the TAMPERING menu. y RETURN : Return to the VIDEO ANALYTICS menu. In the following cases, the initially set tampering detection function can malfunction.
  • Page 32 camera operation mask area number and specify the size and position. ` SEL AREA : You can select up to 4 areas. ` MODE : Determines whether to use the area selected in the AREA. ` TOP/BOTTOM/LEFT/RIGHT : Adjust the size and position of the selected area. ` RETURN : Return to the MOTION DET menu.
  • Page 33 In the following cases, the initially set tampering detection function can malfunction. - In a monitoring environment with a simple background or an environment with low light level or at night, the detection performance can deteriorate. - Sudden changes in the lighting and severe camera shaking can be wrongly detected as tampering. - Immediately after tampering, the camera tampering detection can take up to a max of five seconds.
  • Page 34 camera operation ` SEL AREA : You can select up to 4 areas. ` MODE : Determines whether to use the area selected in the AREA. ` TOP/BOTTOM/LEFT/RIGHT : Adjust the size and position of the selected area. ` RETURN : Return to the MOTION DET menu. y INDICATOR : If an object moves in a pattern set by the user, it will be displayed on the screen as a box.
  • Page 35 1) LINE FENCE LINE FENCE - SEL POS : Selects a SEL POS ▶ POS1 position from X POS ---- ----  POS1,POS2. Y POS --------  - X POS / Y POS : DIRECTION RIGHT Adjust the size and position RETURN of the selected line fence.
  • Page 36 camera operation y ALARM OUT : When object movement is detected, the detection signal will be outputted. ` EXTERNAL : Send signals through external terminals. ` OSD : Display signals on the screen. ` RETURN : Return to the INTELLIGENCE menu. y RETURN : Return to the VIDEO ANALYTICS menu.
  • Page 37 ExiT Select a desired EXIT mode using the Function Setup switch depending on the camera purpose. y saVE : Save the current settings and exit the MAIN SETUP menu. y noT saVE : Do not save the current settings and exit the MAIN SETUP menu. y rEsET : Revert camera to factory settings.
  • Page 38 troubleshooting Troubleshooting If you have trouble operating your camera, refer to the following table. If the guidelines do not enable you to solve the problem, contact an authorized technician. Problems Troubleshooting Nothing appears on the screen. y Check that the power cord and line connection between the camera and monitor are properly connected.
  • Page 39 Video Imaging Device 1/3” 1.3M CMOS 1312(H) x 1069(V) Total Pixels 1305(H) x 1049(V) Effective Pixels Progressive Scan Scanning System Internal Synchronization Frequency H : 15.625KHz / V : 50Hz Horizontal Resolution Color : 1000 TVL / B/W : 1000 TVL Color : 0.03Lux (F1.2, 50IRE),...
  • Page 40 1 Out Alarm Coaxial Control ( SPC-300 Compatible ) Coaxial Control ( SPC-300 Compatible ), RS-485 Communication Coax : Pelco-C (Coaxitron) RS-485: Samsung-T, Samsung-E, Protocol Coax : Pelco-C (Coaxitron) Pelco-D, Pelco-P, Panasonic, Bosch, Honeywell, Vicon, AD, GE Environmental Operating Temperature -10°C ~ +55°C (+14°F ~ +131°F) / Less than 90% RH...
  • Page 41 DimEnsion Unit: mm English_41...
  • Page 42 MEMO...
  • Page 43 SALES NETWORK SAMSUNG TECHWIN CO., LTD. 6, Pangyo-ro 319beon-gil, Bundang-gu, Seongnam-si, Gyeonggi-do, SEOUL 463-400 Rep. of KOREA Tel : +82-70-7147-8753, 8764 Fax : +82-31-8018-3740 www.samsungsecurity.com SAMSUNG TECHWIN AMERICA Inc. SAMSUNG TECHWIN EUROPE LTD. 100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 2nd Floor, No.

This manual is also suitable for:

Scb-5003ph