Samsung SCC-B2015P User Manual
Wdr day/night colour camera
Hide thumbs
Also See for SCC-B2015P:
- User manual (200 pages) ,
- User manual (162 pages) ,
- User manual (80 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Samsung SCC-B2015P
Summary of Contents for Samsung SCC-B2015P
- Page 1 WDR DAY/NIGHT COLOUR CAMERA SCC-B2315(P)/SCC-B2015P User Manual...
-
Page 2: Safety Precautions
9. If this product fails to operate normally, contact the nearest service centre. Never disassemble or modify this product in any way. (SAMSUNG is not liable for problems caused by unauthorized modifications or attempted repair.) 0. When cleaning, do not spray water directly onto parts of the product. - Page 3 CAUTION 1. Do not drop objects on the product or apply strong shock to it. Keep away from a location subject to excessive vibration or magnetic interference. 2. If you want to relocate the already installed product, be sure to turn off the power and then move or reinstall it.
-
Page 4: Important Safety Instructions
Important Safety Instructions Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, or other apparatus (including amplifiers) that produce heat. -
Page 5: Table Of Contents
Contents Safety Precautions Important Safety Instructions ... 4 Contents ... 5 Overview ... 6 Special Features Part Names and Functions ... 8 Side View ... 8 Rear Panel ... 10 Installation ... 13 Before Installation Checking the contents of the package ... 13 Things to keep in mind during installation and use ...13 Connecting the Auto Iris... -
Page 6: Overview
Overview This enriched WDR (Wide Dynamic Range) Day/Night camera can clearly implement both dark and bright parts on the screen with the dual shutter. When a bright object such as window occupies a part of the screen, it appears white in conventional cameras. But using the state-of-the-art WDR function that this camera provides, you can see the clear image. -
Page 7: Special Features
Special Features High Sensitivity It implements images of high sensitivity using the up-to-date Super- HAD P/S CCD. The WDR function of this camera is the state-of-the-art technology that can effectively enlarge the range for screen gain. It is mainly used for taking photos for window scenes inside a building. Using this technology, you can clearly see both indoor and outdoor images, and can enjoy the excellent picture quality, which is enabled by automatically adjusting the WDR level. -
Page 8: Part Names And Functions
Part Names and Functions Side View ❚ 1 Auto Iris Lens Connector 5 ALC Lens Selection Switch 4 Automatic Shutter Lens Control Cable 1 Auto Iris Lens Connector This groove is used for screwing the mount adapter, a part of the bracket where the camera will be installed. - Page 9 5 ALC Lens Selection Switch This switch is used to select the type of the Auto Iris lens for use. After this setting, you have to also set the lens type in the Setup menu (In ALC… and WDR… submenus of IRIS). DC: When the Auto Iris lens is installed for DC control ...
-
Page 10: Rear Panel
Rear Panel ❚ AC24/DC12V(SCC-B2315, B2315P) AC220V~240V(SCC-B2015P) - Page 11 1 Input/Output Connector This connector has input and output jacks for RS-485 control signals, Day & Night switching, and alarm output signals. Function RS-485 DATA+ RS-485 DATA- ALARM OUT GROUND DC +5V EXTERNAL SENSOR Description Jack for connection to RS-485 DATA+ signal line.
- Page 12 2 Setup Switch This switch is used to set the function or property. When this switch is pressed for at least 2 seconds, the Setup menu appears. [Left/Right] movement or changing the displayed value: By pressing this switch left or right, you can move left or right on the menu or change the displayed value.
-
Page 13: Installation
Installation Before Installation ❚ Checking the contents of the package Make sure that the following items are included in the package. Camera User's Manual Things to keep in mind during installation and use Do not disassemble the camera on your own. ... -
Page 14: Connecting The Auto Iris Lens Connector
Connecting the Auto Iris Lens Connector The Auto Iris Lens Connector that is provided with your camera consists of the following parts: Connect each uncovered shutter control cables to the Auto Iris Lens Connector as the following: Pin No. DC Control Type Damp(-) Damp(+) Drive(+) -
Page 15: Installing The Camera
Installing the Camera ❚ Mounting the lens When using the CS lens Mount the CS lens by rotating it clockwise as shown in the picture: When using the C lens After mounting the C-mount adapter by rotating it clockwise, turn the C lens clockwise until it is fixed as shown in the picture. -
Page 16: Setting The Alc Lens Selection Switch
Setting the ALC lens selection switch You can set the lens selection switch located on the side of the camera according to the lens type. When the mounted lens is an auto Iris lens of DC control type, set the switch to “DC.” When the mounted lens is an auto Iris lens of Video control type, set the switch to “VIDEO.”... -
Page 17: Connecting Cables And Checking Operation
Connecting cables and checking operation 1. Connect one end of the BNC cable to the VIDEO OUT jack on the rear of the camera. 2. Connect another end of the BNC cable to the VIDEO IN jack on the monitor. Video In Terminal of Monitor Rear Surface BNC cable... - Page 18 3. Finally connect the power adapter to the camera. You can connect 2 lines of the power adapter to the camera using the Slot Head screwdriver as shown in the picture. (GND: cable with the white stripe line) Note Connect any power source of AC 24V and DC 12V irrespective of polarity.
-
Page 19: Camera Setup
Camera Setup This chapter describes how to configure the camera-related settings. If you press the Setup switch for at least 2 seconds, the Setup menu appears. The Setup OSD (On-screen Display) map brief is like the following: SETUP MENU CAMERA ID WDR... -
Page 20: Camera Id
❚ CAMERA ID This CAMERA ID menu is used to assign a camera ID to this camera. If you press the Setup switch when the CAMERA ID menu is selected, the corresponding setup screen appears. CAMERA ID ON... IRIS ALC... SHUTTER HIGH MOTION DET... -
Page 21: Alc
CAMERA ID IRIS WDR... SHUTTER HIGH MOTION DET DAY/NIGHT DAY... WHITE BAL ATW2 PRIVACY SPECIAL RS-485 EXIT QUIT First select any of DC LENS, VIDEO LENS, and MANU in TYPE. You can adjust the shutter speed in LEVEL 1 and the brightness in LEVEL 2. -
Page 22: Elc
ELC... If you press the Setup switch when the ELC… submenu is selected, the corresponding screen appears. You can make the ELC (Elec- tronic Light Control) function active or not. CAMERA ID OFF... IRIS ELC... SHUTTER HIGH MOTION DET ON... DAY/NIGHT DAY... -
Page 23: Agc
If you keep pressing the LEFT/RIGHT Setup switch, shutter speeds toggles in the following order: OFF AUTO X2 AUTO X4 AUTO X6 AUTO X8 AUTO X12 AUTO X16 AUTO X24 AUTO X32 AUTO X48 ... -
Page 24: Motion
MOTION ❚ The MOTION menu is used to set the intensity of the camera AGC level for monitoring motions. This function is available only in AUTO low speed mode. You can select any of S.SLOW, SLOW, NORM, FAST, and F.FAST according to the AGC intensity level. CAMERA ID IRIS SHUTTER... - Page 25 There are 3 different types like 1, 2, and 3. You cannot change the setting for type 2 because it is prefixed with the full screen. In case of 1 and 3, you can set the motion detection area on your own. Those 3 types are like the following: 1.
-
Page 26: Day/Night
3. Block type: The screen displays with small blocks. When a motion is detected in the selected blocks, the small blocks are displayed on the screen. PRESET: The whole screen becomes the motion detection area. USER...: You can manually set the motion detection area. ... -
Page 27: Day
Note In case of B/W mode, it may fail to focus when B/W mode is converted to Color mode. That is because it must have the condition to have IRIS opened for the maximum before adjusting the Back-Focus. The smaller the F number of lens is, the lower the focus depth of field is (e.g. -
Page 28: Night
NIGHT... If you press the Setup switch when the NIGHT… submenu is se- lected, the corresponding screen appears. (NIGHT) COLOR/BW Even in night mode, you can see colour images in bright illumina- tion. Therefore you can select any of COLOUR… and BW… In case of COLOUR…, you have to set the colour temperature for white balance. -
Page 29: Ext
For this function, you can specify the level for each conversion between Day and Night. Note When the DAY/NIGHT is set to AUTO, the AGC is displayed with --- so you cannot change its setting. This automatically converts the colour mode to BW mode and vice versa by interfacing with an external sensor. -
Page 30: Privacy
ATW2: Its colour temperature variation range is approximately from 2000°K to 10000°K. AWC (Auto White Balance Control): The colour temperature setting is made once. After selecting this, expose to an object to memorize the colour temperature of it and press the Setup switch. -
Page 31: Special
PRIVACY 0 < SIZE > < LOCATION > COLOR EXIT QUIT <In case of selecting a zone on first page> In case of type1, a box type zone is set while a diamond type zone is set for the type 2. When the privacy is any from 0 to 15, four different sizes of mosaics are provided. -
Page 32: Digital Zoom
Note In case of LINE, it doesn’t support DC 12V, for which “---” is displayed. DIGITAL ZOOM You can set the level and ratio of digital zoom. If you press the Setup switch when ON… is selected in DIGITAL ZOOM, the corresponding screen appears. -
Page 33: Dnr
You can configure the DNR (Digital Noise Reduction) related set- tings. If you press the Setup switch when ON… is selected in DNR, the corresponding screen appears. (SPECIAL) LANGUAGE ENGLISH V-SYNC DIGITAL ZOOM VIDEO SET ON... FLICKERLESS SYSTEM INFO You can set the level for this configuration. FLICKERLESS When this is set to ON, the shutter speed is set to 1/100 sec (for NTSC) or 1/120 sec (for PAL) to prevent from flickering by the disac-... -
Page 34: System Info
The RS-485 menu is used to configure the RS-485 communication related settings for this camera. You can connect to RS-485 through the rear panel. (SYSTEM INFO) ROM VER 1.000 EEP VER 1.000 PROTOCOL SAMSUNG ADDRESS TYPE RS-485, HALF BAUD RATE 9600 SERIAL NO. 0000000000000... -
Page 35: Exit
QUIT: Ignores the change and returns to the previous settings. SAVE: Saves the change. PRESET: Ignores the change and returns to the factory default settings. CAMERA ID IRIS SHUTTER MOTION DET DAY/NIGHT WHITE BAL PRIVACY SPECIAL RS-485 EXIT SAMSUNG 9600 ALC... HIGH DAY... ATW2 QUIT... -
Page 36: Product Specifications
Power source SCC-B2315: AC 24V ± 10% (60Hz ± 0.3 Hz), SCC-B2315P: AC 24V ± 10% (50Hz ± 0.3 Hz), SCC-B2015P: AC 220 to 240V ± 10% (50Hz ± 0.3 Hz) Broadcast type SCC-B2315P, B2015P: PAL Standard Colour System SCC-B2315: NTSC Standard Colour System Power SCC-B2315(P): Approx. - Page 37 (3200°K, 5600°K, R/B Gain adjustment) Privacy ON/OFF Signal output Composite Video (1.0 Vp-p, 75ohm, BNC) AI lens VIDEO/DC Lens mount CS/C (Mount Adaptor) Operation -10°C~+50°C temperature Operation ~90% humidity Size 65(W) x 55(H) x 130.5(D)mm Weight SCC-B2315(P): Approx. 410g SCC-B2015P: Approx. 600g Details...
- Page 38 Memo...
- Page 39 Memo...
-
Page 40: Correct Disposal Of This Product
Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.