Specifications - Makita JV143D Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Length of stroke
Strokes per minute (min
Max. cutting capacities
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･
Cd Only for EU countries
Ni-MH
Do not dispose of electric equipment or
Li-ion
battery pack together with household
waste material!
In observance
Directives, on Waste Electric and
Electronic Equipment and Batteries and
Accumulators and Waste Batteries and
Accumulators and their implementation
in accordance with national laws,
electric equipment and batteries and
battery pack(s) that have reached the
end of their life must be collected
separately
environmentally compatible recycling
facility.
Intended use
The tool is intended for the sawing of wood, plastic and
metal materials. As a result of the extensive accessory
and saw blade program, the tool can be used for many
purposes and is very well suited for curved or circular
cuts.
Noise
The typical A-weighted
according to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB (A)
Model
-1
)
Blade type
Wood
Mild steel
Aluminum
Overall length
Net weight
Rated voltage
of the
and returned
noise level determined
) : 82 dB (A)
pA
) : 93 dB (A)
WA
D.C. 14.4 V
END004-6
Vibration
The vibration
determined according to EN60745:
Work mode : cutting boards
Vibration emission (a
Uncertainty (K) : 1.5 m/s
European
Work mode : cutting sheet metal
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
to an
used in a preliminary assessment of exposure.
WARNING:
ENE019-1
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
ENG905-1
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
2
JV143D
18 mm
0 - 2,900
B type
65 mm
6 mm
10 mm
245 mm
1.9 kg
Wear ear protection
total value
) : 7.0 m/s
h,B
2
) : 4.5 m/s
h,M
2
JV183D
18 mm
0 - 2,900
B type
65 mm
6 mm
10 mm
248 mm
2.0 kg
D.C. 18 V
ENG900-1
(tri-axial vector sum)
2
2
ENG901-1