Bios Features Setup - Gigabyte GA-8TX User Manual

8TX Motherboard

BIOS Features Setup

( C ) 1999 American Megatrends, Inc. All Rights Reserved
1st Boot Device
2nd Boot Device
3rd Boot Device
Floppy Drive Seek
BootUp Num-Lock
Password Check
S.M.A.R.T. for Hard Disks
1st / 2nd / 3rd Boot Device
Floppy
LS/ ZIP A:
CDROM
SCSI
NETWORK
IDE-0~IDE-3
Disabled
ATAPI ZIP C:
Floppy Drive Seek
During POST, BIOS will determine if the floppy disk drive installed is 40 or 80 tracks. 360
type is 40 tracks while 720, 1.2 and 1.44 are all 80 tracks.
Enabled
Disabled
AMIBIOS SETUP – BIOS FEATURES SETUP
: Floppy
: IDE-0
: CDROM
: Disabled
: On
: Setup
: Disabled
Figure 3: BIOS Features Setup
Set your boot device priority to Floppy.
Set your boot device priority to LS/ ZIP A:.
Set your boot device priority to CDROM.
Set your boot device priority to SCSI.
Set your boot device priority to NETWORK.
Set your boot device priority to IDE-0~IDE-3.
Disable this function.
Set your boot device priority to ATAPI ZIP C:.
BIOS searches for floppy disk drive to determine if it is 40 or 80
tracks. Note that BIOS can't differentiate between from 720, 1.2 or
1.44 drive type as they are all 80 tracks.
BIOS will not search for the type of floppy disk drive by track number.
Note that there will not be any warning message if the drive installed
is 360. (Default Value)
ESC: Quit
F1 : Help PU/PD+/-/ : Modify
F5 :Old Values(Shift)F2:Color
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
65
: Select Item