Panel And Jumper Definition - Gigabyte GA-8TX User Manual

Panel And Jumper Definition

J7 : For 2X11 Pins Jumper
GN (Green Switch)
GD (Green LED)
HD (IDE Hard Disk Active LED)
SPK (Speaker Connector)
RE (Reset Switch)
P+P P (Power LED)
PW (Soft Power Connector)
Please note , Please connect the power LED, PC speaker, reset switch and power switch etc of
your chassis front panel to the front panel jumper according to the pin assignment above.
HD
GN
1
P P P+
Open: Normal Operation
Close: Entering Green Mode
Pin 1: LED anode(+)
Pin 2: LED cathode( )
Pin 1: LED anode(+)
Pin 2: LED cathode( )
Pin 1: VCC(+)
Pin 2- Pin 3: NC
Pin 4: Data( )
Open: Normal Operation
Close: Reset Hardware System
Pin 1: LED anode(+)
Pin 2: LED cathode( )
Pin 3: LED cathode( )
Open: Normal Operation
Close: Power On/Off
26
Panel and Jumper Definition
S P K RE
1
PW
GD
1