Memory Installation - Gigabyte GA-8TX User Manual

8TX Motherboard

Memory Installation

The motherboard has 4 Rambus In-line Memory Module (RIMM) sockets. The BIOS will
automatically detects memory type and size. To install the memory module, just push it vertically
into the RIMM Slot .The RIMM module can only fit in one direction due to the two notches.
Please note; Both RIMM modules inserted on RIMM1 and RIMM2 slots are recommended to
have the same size, frequency. If not, the larger sized module will l be automatically re-sized by
BIOS to match the smaller sized module. The same rule applies to both RIMM3 and RIMM4
slots.
You can insert two RIMMs or four RIMMs into RIMM slots, but C-RIMM (Continuity RIMM)
modules must be inserted into the empty slots.
CRIMM
RIMM
Check RIMM module if it is supported by the
M/B.
Insert the RIMM module into the slot. Push the ejector tab towards the RIMM.
11