Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Makita CP100DSM
Summary of Contents for Makita CP100DSM
- Page 1 INSTRUCTION MANUAL Cordless Multi Cutter CP100D Read before use.
-
Page 2: Specifications
SPECIFICATIONS Model: CP100D No load speed 300 min Overall length 291 mm Rated voltage D.C. 10.8 V - 12 V max Standard battery cartridge BL1015 / BL1016 / BL1020B / BL1021B / BL1040B / BL1041B Charger DC10SA / DC10SB / DC10WC / DC10WD Net weight 0.72 - 0.88 kg •... - Page 3 Keep children and bystanders away while If devices are provided for the connection of operating a power tool. Distractions can cause dust extraction and collection facilities, ensure you to lose control. these are connected and properly used. Use of dust collection can reduce dust-related hazards. Electrical Safety Do not let familiarity gained from frequent use Power tool plugs must match the outlet.
- Page 4 Use of non-genuine Makita batteries, or batteries that the hand or face. have been altered, may result in the battery bursting SAVE THESE INSTRUCTIONS. causing fires, personal injury and damage. It will also void the Makita warranty for the Makita tool and charger. WARNING: DO NOT let comfort or familiarity with product (gained from repeated use) replace strict Tips for maintaining maximum adherence to safety rules for the subject product.
-
Page 5: Functional Description
Never use the tool if it starts when or battery are placed under one of the following conditions: you pull the switch trigger without pressing the lock-off Overloaded: button. Ask your local Makita Service Center for repairs. The tool is operated in a manner that causes it to draw an abnormally high current. WARNING: Never disable the lock function or In this situation, turn the tool off and stop the application tape down the lock-off button. -
Page 6: Operation
► 1 . Switch trigger 2. Lock-off button To start the tool, press the lock-off button and pull the switch trigger. Release the switch trigger to stop. The lock- off button can be pressed from either the right or left side. ASSEMBLY CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed before carrying out any work on the tool. ► 1 . -
Page 7: Maintenance
Never use gasoline, benzine, thinner, alcohol or the like. Discoloration, deformation or cracks may result. To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. NOTICE: Do not apply excessive force to the OPTIONAL tool. It does not help to cut the material smoothly. - Page 8 Makita Europe N.V. Jan-Baptist Vinkstraat 2, 3070 Kortenberg, Belgium Makita Corporation 3-11-8, Sumiyoshi-cho, Anjo, Aichi 446-8502 Japan 885574-226 www.makita.com 20170206...