Adjusting The Projector Level - Vivitek D964HD User Manual

Adjusting the Projector Level

Take note of the following when setting up the projector:

The projector table or stand should be level and sturdy.

Position the projector so that it is perpendicular to the screen.

Remove the Back Foot Holder on the rear adjuster foot before adjusting the projection
angle.

Ensure the cables are in a safe location. You could trip over them.
1.
To raise the level of the projector, lift the projector [A] and press the height-
adjuster button [B].
The height adjuster drops down [C].
2.
To lower the level of the projector, press the height-adjuster button and push
down on the top of the projector.
3.
To adjust the angle of the picture, turn the tilt-adjuster [D] right or left until
the desired angle has been achieved.
– 15 –