Table of Contents
Advertisement
4 Use Bluetooth
devices
With this speaker, you can listen to audio from
a player and make a call through Bluetooth.
Note
•
WOOX Innovations does not guarantee the
compatibility with all Bluetooth devices.
•
Before pairing a device with this product, read its user
manual for Bluetooth compatibility. Make sure that the
connected Bluetooth device supports the Advanced
Audio Distribution Profile (A2DP) and the Audio Video
Remote Control Profile (AVRCP).
•
The product can memorize a maximum of 4 paired
devices.
•
Make sure that Bluetooth function is enabled on your
device, and your device is set as visible to all other
Bluetooth devices.
•
The operational range between this product and a
Bluetooth device is approximately 10 meters (30 feet).
•
Any obstacle between this product and a Bluetooth
device can reduce the operational range.
•
Keep away from any other electronic device that may
cause interference.
Connect a device
1
Rotate the knob to turn on the speaker.
» The Bluetooth indicator flashes blue.
2
On your device, search for Bluetooth
devices.
3
In the device list, select Philips BT2600.
• If a message prompts for the
permission for Bluetooth connection
with Philips BT2600, confirm it.
• If a password is required, enter 0000
and then confirm.
» The speaker beeps twice and the
Bluetooth indicator turns to solid blue
when the Bluetooth connection is
successful.
6
EN
• If you fail to search for Philips BT2600,
press and hold
pairing mode.
Bluetooth indicator
The LED indicator on the top indicates the
status of Bluetooth connection.
Indicator
Bluetooth connection
Flashing
Pairing
blue
quickly
Flashing
Connecting or waiting for
blue
connection
slowly
Solid blue
Connected
Pair and connect a second device
You can pair and connect a maximum of two
Bluetooth-enabled devices to this product
actively at the same time.
1
Press and hold
pairing mode.
» The Bluetooth indicator flashes blue
quickly.
» The speaker beeps twice.
2
Pair and connect a second device to the
speaker.
• If two devices are connected with
speaker, you can play music from any of
the connected devices, music playback
from another device will be paused.
Note
•
If you want to pair a third device, press and hold
/MULTIPAIR until you hear a double beep to
disconnect the first connected device and enter pairing
mode.
•
If no music is played after 15 minutes, the speaker goes
to standby mode automatically for power saving.
/MULTIPAIR to enter
/MULTIPAIR to enter
Advertisement
Table of Contents
