Table of Contents
Advertisement
1.2
Getting started
1.2.1
Set-up
Removing or installing the back cover
Inserting or removing the SIM card
You must insert your SIM card to make phone calls. Please power off
your phone before inserting or removing the SIM card.
4009X
4009D
SIM2
SIM1
Place the SIM card with the chip facing downwards and slide it into its
housing. Make sure that it is correctly inserted. To remove the card,
press and slide it out.
For dual SIM models, both SIM1 and SIM2 can support 2G
and 3G networks. If both of them are 3G SIM cards, only one
card can support 3G network
mini-SIM card. Do not attempt to insert other SIM types
like micro and nano cards, otherwise you may damage your
phone.
(1)
4009D only.
5
Pixi3-3.5_4009X_4009D GB QG_Eng_EN_10_150109.indd 5-6
(1)
. Your phone only supports
Installing or removing the battery
Please power off your phone before removing the battery.
•
Insert and click the battery into place, then close the cover.
•
Unclip the cover, then remove the battery.
Installing the microSD card
To install, please open microSD card lock first, and then place the
external microSD card into the slot with the gold contact facing
down. To remove the external microSD card, please open microSD
card lock and take it out from the slot.
Charging the battery
Connect the battery charger to your phone and mains socket
respectively.
If the battery is very low, there will be no indication that
power is being received until the charge is sufficient to show
the charging status bar. To reduce power consumption and
energy waste, once the battery is fully charged, disconnect
your charger from the plug; switch off Wi-Fi, Bluetooth or
background-running applications when not in use; reduce
the backlight time, etc.
6
2015/1/9 9:13:41
Advertisement
Table of Contents
