NEC N8104-185 User Manual page 51

Uninstalling QSFP Module
Remove the QSFP module from the board.
IMPORTANT:
Grasp the pull tab and pull to
release the latch, and then
remove the module.
- Secure the Dust covers.
- If a MPO cable is not connected, the MPO connector must be attached a
Dust cover (MPO).
- Listen for an audible clicking sound when the QSFP+ module is inserted into
the QSFP slot
- If you cannot insert the QSFP module as far as it will go, please remove it
and then check the direction of QSFP module.
E-19