Air Purification; Ionisation; Selecting The Temperature; Selecting The Speed - Bosch PAM21011 Instructions For Use Manual

necessary for the appliance to work more
efficiently in this operation function.

Air purification

The air inside the room (ventilation) is
circulated through a purifying filter (air
purification) when the appliance is set to this
function.
The standard appliance is fitted with a basic
filter and a double active filter (see "Cleaning
and Maintenance") against:
- Smells and smoke.
- Pollen, bacteria and dust.
Plug the appliance into the mains electricity
supply.
Fit the hot air expulsion tube (see
"Preparing the appliance before use").
Lift the air director on the top of the
appliance.
Select the air purification function
"Selecting the operation function").
Select the operation speed, (see "Selecting
the speed").
Warning
We recommend you leave the filters in
position regardless of the function setting
(cooling, dehumidification, air purification)
in order to purify the air more effectively.

Ionisation

Your air-conditioning system is fitted with an
ioniser which can be connected additionally.
The ioniser enriches the air with negatively
charged ions. In nature, this normally happens
after a summer storm, on the coast or in
mountain areas. Ionised air is fresh and clean
because it is exceptionally rich in negative
ions.
• Press the ioniser key
panel to activate the ioniser. The ion symbol
appears on the screen to indicate that the
function has been activated.
• Press the ioniser key again to deactivate it.
The ioniser symbol disappears from the
display.
Instructions for Use
, (see
on the control
The ioniser can be used in conjunction with
any function (cooling, dehumidification and air
purification) and any speed.

Selecting the temperature

This function is only available in the cooling
function.
Place the selection box on the temperature
selection menu (see "up" and "down" keys).
Use the "+" and "–" keys to move within the
selection box until the desired temperature is
reached (see "+" and "–" keys).
The "+" key increases the desired temperature
and the "–" key reduces the desired
temperature.
The temperature selectable ranges from 18°C
to 30°C and can be set to the nearest 1°C.
Keep the key pressed in to increase or
decrease the desired temperature more
quickly.

Selecting the speed

Your appliance has five manual speeds
and two automatic speeds:
maximum
maximum auto speed
temperature by beginning at maximum cooling
power until the temperature set by the user is
reached. The silent auto speed
regulates the temperature by beginning at a
lower, more silent cooling power until the
temperature set by the user is reached.
Manual speeds:
Place the selection box on the speed selection
menu (see "Navigation" Up and down keys).
Use the "+" and "–" keys to move within the
menu to set the desired speed (see
"Navigation" "+" and "–" keys).
The manual symbol appears on the screen
followed by the last speed set. Press the "+"
and "–" keys to change the speed from
maximum
versa.
38
and silent . The
regulates the
to silent and vice