Table of Contents
Advertisement
USB Legacy Support
Keyboard/FDD
Set USB Legacy Support Keyboard / Floppy.
KB/Mouse/FDD
Set USB Legacy Support Keyboard / Mouse /Floppy.
Disabled
Disable USB Legacy Support Function . (Default Value)
USB Port 64/60 Emulation
Enabled
To use USB mouse under Win NT environment, set USB Legacy
Support to KB/Mouse/FDD and USB Port 64/60 Emulation to
enabled.
Disabled
Disable this Function . (Default Value)
BIOS Flash Protection
Enabled
BIOS Flash Write Protection.
Disabled
Normal. (Default Value)
DRAM Drive Strength
Auto
Set DRAM Drive Strength Auto. (Default Value)
Manual
Set DRAM Drive Strength Manual.
If DRAM Drive Strength is Manual, then you can adjust item below.
MD Bus Strength
High
Set MD Bus Strength High. (Default Value)
Low
Set MD Bus Strength Low.
CAS Bus Strength
High
Set CAS Bus Strength High. (Default Value)
Low
Set CAS Bus Strength Low.
Delay DRAM Read Latch
1.0ns
Set DRAM Read Latch Delay 1.0ns. (Default Value)
1.5ns
Set DRAM Read Latch Delay 1.5ns.
0.5ns
Set DRAM Read Latch Delay 0.5ns.
No delay
Set DRAM Read Latch No delay.
Memory Data Drive
6 mA
Set Memory Data Drive 6 mA.
8 mA
Set Memory Data Drive 8 mA. (Default Value)
52
BIOS Setup
Advertisement
Chapters
Table of Contents
