Gigabyte GA-7ZMMHC User Manual page 67

7ZMMHC Motherboard
Parallel Port IRQ
7 Set Parallel Port IRQ to 7.
Auto Set Auto to parallel Port IRQ DMA Channel. (Default Value)
5 Set Parallel Port IRQ to 5.
OnBoard IDE
Disabled Disable OnBoard IDE.
Both Both Primary & Secondary IDE channel will be enabled.
(Default Value)
Primary Only Primary IDE channel is enable.
Secondary Only Secondary IDE channel is enable.
Enhance ATAPI Performance
If you wish to maximize the performance of your ATAPI
Performance" as "Enabled" . Please note, enabling this function may cause your ATAPI
devices become unstable. For power End-User use only.
Disabled Disable Enhance ATAPI Performance. (Default Value)
Enabled Enhance ATAPI Performance function.
IDE Boot Delay (Sec.)
1~10 Set IDE Boot Delay to 1~10 Sec. (Default Value: 7)
Disabled Disable this function.
OnBoard AC'97 Audio
Auto Enabled onboard AC'97 audio function. (Default Value)
Disabled Disable this function.
OnBoard MC'97 Modem
Auto BIOS will search MC97 Codec (AMR Modem Card). If found, MC97
function will be enabled. If no MC97 Codec found, MC97 function will be
disabled. (Default Value)
Disabled Disable this function.
OnBoard Legacy Audio
Enabled Enable OnBoard Legacy Audio. (Default Value)
Disabled Disable OnBoard Legacy Audio.
devices
, set "Enhance ATAPI
59