Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Gamma Leko Toro
Summary of Contents for Gamma Leko Toro
- Page 1 Leko Toro RGBW 200w LED Spot User Manual Leko Toro– GAMMA LED Vision Page 1 of 13...
-
Page 2: Table Of Contents
2. Setup and Operation............................6 Using the LCD Menu and Buttons........................6 DMX Setup................................7 DMX Basics................................7 DMX Wiring................................7 DMX Modes and Configuration........................9 3. Maintenance................................11 Routine Maintenance............................11 Troubleshooting Problems..........................11 4. Technical Specifications............................12 Photometric Reports............................13 Leko Toro– GAMMA LED Vision Page 2 of 13... -
Page 3: Introduction And Setup
User Manual Mounting and Operation Use a clamp rated for the full weight of the Leko Toro to hang the fixture from the mount(s) on the fixture’s yoke. As an added safety measure be sure to attached at least one properly rated safety cable to the fixture using on of the safety cable rigging point integrated in the base assembly or on the yoke. - Page 4 ∙Warranty is voided if there are any malfunctions from not following the user manual while op- erating or any hazardous operation, like shock short circuit, electronic shock, lamp broken, etc. Leko Toro– GAMMA LED Vision Page 4 of 13...
-
Page 5: Customer Support
Customer Support WARRANTY POLICY GAMMA LED Vision warrants its products for the periods set below from the date of pur- chase to be free of manufacturer and workmanship defects. Warranty does not cover nor- mal wear and tear caused by force, negligence or misuse of products. GAMMA LED Vi- sion is not responsible for any damages or injury caused by misuse or improper handling of the products and in accordance with instructions and specifications of manual. -
Page 6: Setup And Operation
Manually set the White level, 0-255 H-DIMMER-001 PROGRAM PROGRAM-01 Built-in programs. SPEED SPEED-01 Sets the speed of the built-in programs. Test-md auto Test-md auto Regular Auto-Mode Test-md audio Test-md audio Sound-Active Auto Mode Leko Toro– GAMMA LED Vision Page 6 of 13... -
Page 7: Dmx Setup
1, 2, and 3 are used. The cable should be a 2 conductor, shielded cable of at least 110 ohms resistance. Microphone cable is not DMX cable. Please refer to the diagram below: Leko Toro– GAMMA LED Vision Page 7 of 13... - Page 8 XLR plug with a 120 Ω resistor connected between pins 2 and 3, which is then plugged into the output XLR socket of the last fixture in the chain. Please see illustrations below: Leko Toro– GAMMA LED Vision Page 8 of 13...
-
Page 9: Dmx Modes And Configuration
DMX Modes and Configuration The Leko Toro has multiple DMX modes, sometimes called “personalities”, “profiles”, or as we will use here “modes”. In general, modes with more DMX channels offer a greater level of control or options but take up more of your output channels on your lighting console or software. - Page 10 Green Dimmer Blue 0-255 Blue Dimmer White 0-30 White Dimmer Color Macros 0-255 Color Macros Auto-Program 0-10 No Function Macros 11-120 Chase Macros 121-180 Fade Macros 181-244 Strobing Macros 245-255 Sound-Active Mode Leko Toro– GAMMA LED Vision Page 10 of 13...
-
Page 11: Maintenance
Plug the light directly into the DMX controller with a cable that you know is good. • Unplug all other lights – does it work? Try to use another DMX controller. • Leko Toro– GAMMA LED Vision Page 11 of 13... -
Page 12: Technical Specifications
• 3-Pin XLR connectors IN/OUT • Low noise fan • 40°C Max ambient temperature • IP20 protection rating • AC100-230V 50-60HZ • Max. Power: 220W • Dimensions: 340(D)*270(W)*650(H)mm • Net Weight: 9.3kg Leko Toro– GAMMA LED Vision Page 12 of 13... -
Page 13: Photometric Reports
Photometric Reports 26 Degree Lens – FC at Center Distance RGBW at Full 15’ 20’ 25’ 30’ Leko Toro– GAMMA LED Vision Page 13 of 13...