Gigabyte GA-7VKML User Manual page 23

1) CPU_FAN (CPU FAN Connector)
1
GND
2) SYS_FAN (System FAN Connector)
1
GND
3) ATX (ATX Power)
+12V
5V SB (Stand by +5V)
Power Good
GND
VCC
GND
VCC
GND
3.3V
3.3V
Ø Please note, a proper installation of the CPU
cooler is essential to prevent the CPU from run
ning under abnormal condition or damaged by
Sense
overheating.The CP U fan connector supports
Max. current up to 600mA .
Ø This connector allows you to link with
the cooling fan on the sy stem case to
low er the sy stem temperature.
Sense
Ø AC power cord should only be connected to
20
your pow er supply unit after ATX pow er cable
VCC and other related devices are firmly connected
to the mainboard.
VCC
-5V
GND
GND
GND
PS-ON(Sof t On/Off)
GND
-12V
3.3V
1
- 19 - Hardware Installation Process