Chapter 2 Hardware Installation Process - Gigabyte GA-7VKML User Manual

Chapter 2 Hardware Installation Process

To set up your computer, you must complete the following setups:
Step 1- Set system Sw itch ( CLK_SW)...for PCB Ver. 1.1
Step 1- Set system Jumper(CLK_JP)...for PC B Ver. 3.2
Step 2- Install the Centr al Processing Unit ( CPU)
Step 3- Install memory modules
Step 4- Install expansion cards
Step 5- Connect ribbon cables, cabinet w ires, and power supply
Step 6- Setup BIOS softw are
Step 7- Install supporting software tools
Step 5
Step 4
Step 5
Step 4
Step 2
Step 2
- 9 -
Step 3
Step 1
Step 5
PCB Ver. 1.1
Step 3
Step 1
Step 5
PCB Ver. 3.2
Introduction