Viewing And Changing Security Settings In The Setup Utility Program; Using Passwords And Windows Accounts - Lenovo ThinlStation P330 Hardware Maintenance Manual

Figure 12. Installing a cable lock

Viewing and changing security settings in the Setup Utility program

To view and change security settings in the Setup Utility program, do the following:
1. Start the Setup Utility program. See "Starting the Setup Utility program" on page 65.
2. Select Security.
3. Follow the instructions on the right side of the screen to view and change security settings. You can refer
to "Using the Setup Utility program" on page 65 to get basic information about some major security
settings.
4. To save settings and exit the Setup Utility program, press F10 or Fn+F10 (depending on the keyboard
settings). Then, select Yes in the window displayed, and press Enter.

Using passwords and Windows accounts

You can use BIOS passwords and Windows accounts to prevent unauthorized access to your computer and
data. To use the BIOS passwords or the Windows accounts, do the following:
• To use BIOS passwords, see "Using BIOS passwords" on page 68.
• To use Windows accounts, do the following:
62
P330 Hardware Maintenance Manual