Using The Energy Saving Feature; Selecting The Source; Editing The Input Source Names - Samsung LE32R3 Owner's Instructions Manual

Using the Energy Saving Feature

Selecting the Source

Editing the Input Source Names

This function adjusts the brightness of the TV so as to reduce power consumption.
When you watching TV at night, set the "Energy Saving " mode option to "High" so
as to reduce the dazzling of your eyes as well as the power consumption.
1. Press the MENU button to display the on-screen menu.
Press the or button to select "Setup", then press the ENTER button.
2. Press the or button to select "Energy Saving",
then press the ENTER button.
3. Select the required option (Off, Low, Medium, High) by pressing
the or button. Press the ENTER button.
4. Press the EXIT button to exit.
You can select among external sources connected to your TV's input jacks.
1. Press the MENU button to display the menu.
Press the ENTER button, to select "Input".
2. Press the ENTER button again, to select "Source List".
When no external device is connected to your set, only "TV", "Ext.1", "Ext.2" are
activated in the "Source List". "AV", "S-Video", "Component", "PC", "HDMI" are activated
only when they are connected to your set.
3. Select the required device by pressing the
Press the ENTER button.
Press the SOURCE button on the remote control to toggel between all the available source.
TV mode can be selected by pressing the TV button, number buttons(0~9), and the P
/ button on the remote control. But it cannot be selected using the SOURCE button.
You can select PC mode by simply pressing the PC button on the remote control.
Name the device connected to the input jacks to make your input source
selection easier.
1. Press the MENU button to display the menu.
Press the ENTER button, to select "Input".
2. Press the or button to select "Edit Name", then press the ENTER button.
3. Press the or button to select the device that you wish to edit.
Press the ENTER button.
4. Press the or button to select the required device.
Press the ENTER button.
5. Press the EXIT button to exit.
English-20
or button.