Hitachi CPX2(M1-20ML) Service Manual page 60

11. Replacing the exhaust fan
Be sure to do the following works before changing the exhaust fan.
a. Prepare the following replacement parts.
Exhaust fan(P#: GS01411) ................1pcs
Fan cushions(P#: MS01612) .............1set
Fan cushion A ........................2pcs
Fan cushion B ........................1pcs
Fan cushion C ........................1pcs
Fan cushion D ........................1pcs
b. Assemble the exhaust fan and fan cushions as described bellow.
1) Attach the fan guard to the new exhaust fan as described bellow.
2) Stick two pieces of the Fan cushion A to upper corners of the fan.
Fan cushion A
3) Stick the Fan cushion B to the outer of the fan.
Make sure not to overflow from edge of the fan.
stick to the
bottom first.
4) Stick the Fan cushion C to the bottom of the fan.
All manuals and user guides at all-guides.com
CPX2(M1-20WL)
Lead
Fan cushion B
Fan cushion C
60
5) Stick the Fan cushion D to the top of the fan after
you attached the fan to the bottom case.
Exhaust Fan
Fan cushion D
2~4