Hitachi CPX2(M1-20ML) Service Manual page 54

All manuals and user guides at all-guides.com
CPX2(M1-20WL)
When assembling
a. Tighten 7 screws on the bottom and 3 screws on the rear after attaching the upper case with the lamp door
separated.
In order not to make a gap between the upper and the bottom cases, tighten these screws while pressing
down the upper case in the direction of the arrow. Be careful not to bend the outside casing. (Torque:0.39-
0.59N•m)
b. Attach the Lamp door.
Lamp door
CAUTION
Tighten this screw using a manual screwdriver.
54