Table of Contents
Advertisement
3.3 STATUS INDICATORS
Table 3-3: LED codes
No.
Print
1
Power
3
Alternator
4
Charge
5
Fault
4.
INSTALLATION
4.1 MATERIAL CHECKING
Before installation, check that the product is in good physical condition.
Please check the item with the list attached in the box.
4.3 PROPER INSTALLATION LOCATION
•
PMDC-30 is designed with IP20 and for internal installation ONLY.
•
The temperature at the casing and heat sink of PMDC-30 can be as high as 60°C
during operation.
•
Ensure PMDC-30 is installed away from flammables and explosives.
•
Please have the installation away from inflammable and explosive goods.
•
Ensure PMDC-30 is installed out of reach of children.
•
Ensure mounting surface is flat and rigid.
Never install PMDC-30 in a sealed enclosure with battery.
Colour
Status
Description
ON
Working normal
Green
OFF
No working or Low Power Mode
ON
Motor battery voltage in the range
Green
Flashing
Motor battery voltage high
OFF
Motor battery voltage low
ON
Charging battery at bulk or absorption stage
Green
Flashing
Charging battery at float stage
OFF
No charging to auxiliary battery
1. PMDC-30 over temperature
ON
2. Motor battery voltage high
3. Output to auxiliary battery short circuit
Red
Flashing
1. Auxiliary battery over temperature or under temperature
OFF
No fault
7
Advertisement
Table of Contents
