Pnp/Pci Configurations - Gigabyte GA-6VEM User Manual

PnP/PCI Configurations

CMOS Setup Utility -Copy right (C) 1984-2001 Aw ard Softw are
Reset Configuration Data
Resources Controlled By
øIRQ Resources
øDMA Resources
PCI1 IRQ Assignment
PCI2 IRQ Assignment
PCI3 IRQ Assignment
higf: Mov e Enter:Select +/-/PU/PD:Value F10:Sav e ESC:Ex it F1:General Help
F5:Prev ious Values F6:Fail-Safe Defaults F7:Optimized Defaults
C Reset Config uration Data
8Disabled
8Enabled
C Resources Controlled by
8Manual
8Auto(ESCD)
C IRQ Res ources ( 3,4,5 ,7,9,10,11,12,14,15 )
8PCI/ISA PnP
8Legacy ISA
PnP/PCI Configurations
Disabled
Auto (ESCD)
Press Enter
Press Enter
Auto
Auto
Auto
Figure 7: PnP/PCI Configurations
Disabled this function. (Default v alue)
Enable clear PnP information in ESCD.
User can set the PnP resource (I/O Address, IRQ & DMA
channels) used by legacy ISA DEVICE.
BIOS automatically use these PnP rescuers. (Default v alue)
The resource is used by PCI dev ice.
Set the resource to reserv ed.
45
BIOS Setup
Item Help
Menu Lev el