Step 2: Install Memory Modules - Gigabyte GA-6VEM User Manual

Step 2: Install memory modules

The motherboard has 2 dual in-line memory module (DIMM) sockets support 4 banks. The BIOS will
automatically detects memory type and size. To install the memory module, just push it vertically into the
DIMM Sl o t .The DIMM module can only fit in one di r ection due to the two notch. Memory size can vary
between sockets.
1. The DIMM slot has two notch, so the
DIMM memory module can only fit in
one direction.
3. Close the plastic clip at both edges of the DIMM slots to lock the DIMM module.
Reverse the installation steps when you wish to remove the DIMM module.
M When STR/DIMM LED is ON, do not install/remove SDRAM from socket.
M Please note that the DIMM module can only fit in one direction due to the two
notches. Wrong orientation will cause improper installation. Please change
the insert orientation.
Hardw are Installation Process
SDRAM
2. Insert the DIMM memory module
vertically into the DIMM slot. Then
push it down.
13