Gigabyte GA-6VA7+ User Manual page 76

6VA7+
2F8/IRQ3 Enable onboard Serial port 2 and address is 2F8.
3E8/IRQ4 Enable onboard Serial port 2 and address is 3E8.
2E8/IRQ3 Enable onboard Serial port 2 and address is 2E8.
Disabled Disable onboard Serial port 2.
UART2 Mode Select
(This item allows you to determine which UART2 Mode of onboard I/O
chip), the default value is Normal.
ASKIR Set onboard I/O chip UART2 to ASKIR Mode.
IrDA Set onboard I/O chip UART2 to IrDA Mode.
Normal Set onboard I/O chip UART2 to Normal Mode.
UART2 Duplex Mode
The default value is Half.
Half Set UART2 Duplex Mode to Half.
Full Set UART2 Duplex Mode to Full.
RxD , TxD Active
The default value is Hi, Lo.
Hi, Hi RxD set Hi, TxD set Hi.
Hi, Lo RxD set Hi, TxD set Lo.
Lo, Hi RxD set Lo,TxD set Hi.
Lo, Lo RxD set Lo,TxD set Lo.
IR Transmittiion delay
The default value is Enabled.
Set IR Transmittiion delay Enabled.
Enabled
Disabled Set IR Transmittiion delay Disabled.
Onboard Parallel port
The default value is 378/IRQ7.
378/IRQ7 Enable onboard LPT port and address is 378/IRQ7.
278/IRQ5 Enable onboard LPT port and address is 278/IRQ5.
Disabled Disable onboard LPT port.
4-30