Technical Data - DeWalt DW872 Original Instructions Manual

355 mm METAL CUTTING CHOPSAW
DW872
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.

Technical Data

Voltage
UK & Ireland
Type
Power Input
No-load speed
Blade diameter
Blade bore
Blade body thickness
Blade kerf thickness
No. of blade teeth
Cross-cutting capacity at 90˚
circular
square
rectangular
angular
Cross-cutting capacity at 45˚
circular
square
rectangular
angular
Weight
Noise values and vibration values (triax vector sum) according to EN62841:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
The vibration and/or noise emission level given in this
information sheet has been measured in accordance with
a standardised test given in EN62841 and may be used to
compare one tool with another. It may be used for a preliminary
assessment of exposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and/
or noise should also take into account the times when the
tool is switched off or when it is running but not actually
WALT one of the
e
DW872
V 230
AC EC-Declaration of Conformity
V 230/115
AC
Machinery Directive
15
W 2200
min -1 1300
mm 355
Metal Cutting Chopsaw
mm 25.4
DW872
mm 1.8
D WALT declares that these products described under
e
mm 2.2
Technical Data are in compliance with:
70
2006/42/EC, EN62841-1:2015 + AC:2015, EN62841-3-9:2020 +
A11:2020 as applicable.
These products also comply with Directive 2014/30/EU and
mm 130
2011/65/EU. For more information, please contact D
mm 100 x 100
the following address or refer to the back of the manual.
mm 75 x 130
The undersigned is responsible for compilation of the technical
mm 92 x 92
file and makes this declaration on behalf of D
mm 79
mm 79 x 79
mm 79 x 123
Markus Rompel
mm 56 x 56
Vice President of Engineering, PTE-Europe
D WALT, Richard-Klinger-Straße 11,
kg 22.5
e
65510, Idstein, Germany
15.12.2021
dB(A) 104.0
dB(A) 112.0
dB(A) 3.0
doing the job. This may significantly reduce the exposure
level over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration and/or noise such
as: maintain the tool and the accessories, keep the
hands warm (relevant for vibration), organisation of
work patterns.
EngLIsh
WALT at
e
WALT.
e
25