Q-Flash Introduction - Gigabyte GA-6OXT User Manual

GA-6OXT(-A) Motherboard

Q-Flash Introduction

A. What is Q-Flash Utility?
Q-Flash utility is a pre-O.S. BIOS flash utility enables users to update its BIOS within BIOS
mode, no more fooling around any OS.
B. How to use Q-Flash?
a. After power on the computer, pressing <Del> immediately during POST (Power On Self Test) it
will allow you to enter AWARD BIOS CMOS SETUP, then press <F8> to enter Q-Flash utility.
CMOS Setup Utility-Copyright (C) 1984-2001 Award Software
Standard CMOS Features
Advanced BIOS Features
Advanced Chipset Features
Integrated Peripherals
Power Management Setup
Enter Q-Flash Utility (Y/N)? Y
PnP/PCI Configurations
PC Health Status
ESC:Quit
F8: Q-Flash
b. Q-Flash Utility
Flash Type/Size : SST 39SF020 / 256K
Keep DMI Data : Yes
Enter: Run
Frequency/Voltage Control
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
:Select Item
F10:Save & Exit Setup
Time, Date, Hard Disk Type...
Q-Flash Utility V3.06
Load BIOS from Floppy
Save BIOS to Floppy
Space Bar:Change Value
ESC: Reset
6 0
/ : Select Item