Jp1 (Rear Usb Device Wake Up Selection); Jp22: Case Open - Gigabyte GA-6OXM7E User Manual

6OXM7E Series Motherboard
JP1: Rear USB Device Wake up Selection (USB Connector à CN2)
(If you want to use "USB KB/Mouse Wake from S3"
function, you have to set the BIOS setting "USB KB/Mouse
CN2
Wake from S3" enabled, and the jumper "JP1" enabled).
*(Power on the computer and as soon as memory counting
starts, press <Del>. You will enter BIOS Setup. Select the
item "POWER MANAGEMENT SETUP", then select "USB
KB/Mouse Wake from S3: Enabled". Remember to save
the setting by pressing "ESC" and choose the "SAVE & EXIT
SETUP" option.)

JP22: Case Open

1
Pin No.
Enabled Rear USB Device
1-2 close
Wake up
2-3 close Normal (Default)
1
Pin No. Definition
1 Signal
2 GND
25
Definition