6OXE Series Motherboard
JP1: Rear USB Device Wake up Selection (USB Connector
(If you want to use " USB KB/Mouse Wake from S3 "
function, you have to set the BIOS setting "USB KB/Mouse
USB
Wake from S3" enabled, and the jumper " JP1 & JP4 " enabled).
*(Power on the computer and as soon as memory counting
starts, press <Del>. You will enter BIOS Setup. Select the
item " POWER MANAGEMENT SETUP ", then select " USB
KB/Mouse Wake from S3: Enabled ". Remember to save
the setting by pressing "ESC" and choose the "SAVE & EXIT
SETUP" option.)
JP3: PS/2 Keyboard Power On
1
Pin No.
Enable Rear USB Device
1-2 close
Wake up
2-3 close Normal (Default)
1
Pin No.
1-2 close PS/2 Keyboard Power on
Enable
2-3 close Normal (Default)
23
USB)
Definition
Definition