Table of Contents
Advertisement
Menu
Item
Mode
Bass
Treble
Equalizer
Balance
Headphone Volume
Surround
Volume Correction
Speaker Distance to
Wall
Preferred Multi Audio
NICAM
HDMI1 / 2 Input
Audio Description
Volume
Speakers
Headphones
Reset to Defaults
A different menu will be displayed while SD Card or PC is used. (p. 50 - p. 53 and p. 54 - p. 55)
Only available items can be selected.
Adjustments / Configurations (alternatives)
Selects the basic sound mode (Music / Speech / User)
The selected mode affects all input signals.
Music: Improves sound quality for watching music videos, etc.
Speech: Improves sound quality for watching news, drama, etc.
In Music and Speech modes, you can adjust "Bass" and "Treble" settings, and those
settings will be stored for each mode.
User: Adjusts the sounds manually by using the equalizer to suit your favourite sound quality.
For the User mode, "Equalizer" will appear on the Sound Menu instead of "Bass" and
"Treble". Select the "Equalizer" and adjust the frequency.
Increases or decreases level to enhance or minimise lower, deeper sound output
Increases or decreases level to enhance or minimise sharper, higher sound output
Adjusts the frequency level to suit your favourite sound quality
This function is available when "Mode" is set to "User".
Select the frequency and change the frequency level by using the cursor button.
If you want to enhance the bass sound, raise the level of the lower frequency. If you
want to enhance the treble sound, raise the level of the higher frequency.
To reset the levels of each frequency to the default settings, select the "Reset to
Defaults" by using cursor button, and then press the OK button.
Adjusts volume level of right and left speakers
Adjusts the volume of the headphones
Surround sound settings (Off / V-Audio / V-Audio Surround)
V-Audio: Provides a dynamic enhancer of width to simulate improved spatial effects
V-Audio Surround: Provides a dynamic enhancer of width and depth to simulate
improved spatial effects
Adjusts the volume of individual channel or input mode
Adjusts the low frequency sound (Over 30cm / Up to 30cm)
If the gap between the TV and wall is over 30 cm, "Over 30cm" is recommended.
If the gap between the TV and wall is within 30 cm, "Up to 30cm" is recommended.
Selects the preferred language for digital channel multi audio (depending on the
broadcaster) (English / Welsh / Gaelic)
Near Instantaneous Companded Audio Multiplex
Reproduces NICAM stereo sound (Off / On)
Off if reception is poor (FM monaural sound)
Analogue mode only
Select to fit the input signal (Digital / Analogue) (p. 68)
Digital
: When sound is carried via the HDMI cable connection
Analogue : When sound is not carried via the HDMI cable connection
HDMI input mode only
Useful for visually-impaired viewers (Off / Auto)
Set to "Auto" to activate the description sound track if available
The availability of audio description sound track is indicated by "AD" in the information
banner (p. 15).
DVB mode only
Adjusts the volume for Audio Description
DVB mode only
Set to "On" to activate the description sound track from TV speakers (Off / On)
DVB mode only
Set to "On" to activate the description sound track from headphones (Off / On)
DVB mode only
Press the OK button to reset the present Sound Mode, Balance, Headphone Volume
and Surround to the default settings
"Equalizer" (below)
29
Advertisement
Table of Contents
