Gigabyte GA-6OXET User Manual page 53

A.5 Notices:
1. In order for STR to function properly, several hardware and software requirements must be
satisfied:
A. Your ATX power supply must comply with the ATX 2.01 specification (provide more than
720 mA 5V Stand-By current).
B. Your SDRAM must be PC-100 compliant.
2. Jumper JP7 is provided to connect to the STR LED in your system chassis. [Your chassis may
not provide this feature.] The STR LED will be illuminated when your system is in STR sleep
mode.
Please note:
Do not remove memory modules while DIMM LED is on. It might cause short
or other unexpected damages due to the 3.3V stand by voltage. Remove
memory modules only when STR function is disabled by jumper and AC
Power cord is disconnected.
Suspend To RAM Installation
STR LED Connector External
1
DIMM LED
(Optional)
46
+