Jp18: Clear Cmos Function; Jp19:Front Usb Device Wake Up Selection - Gigabyte GA-6OXET User Manual

6OXET Series Motherboard

JP18: Clear CMOS Function

Please note:
You may clear the CMOS data to it's default values by this jumper.
JP19:Front USB Device Wake up Selection (USB Port
Please note , To use "USB KB/MS Wakeup from S3" function, set BIOS setting
"USB KB/MS Wake up from S3" to ENABLED and enable jumpers JP19& JP4. To
prevent user confusion, it is recommended to enable jumper JP1 (Rear USB
Device wake-up function).
*(Power on the computer and as soon as memory counting starts, press <Del>.
You will enter BIOS Setup. Select the item "POWER MANAGEMENT SETUP",
then select "USB KB/MS Wake up from S3". Remember to save the setting by
pressing "ESC" and choose the "SAVE & EXIT SETUP" option.)
1
Normal
(Default)
Pin No.
1-2 close Clear CMOS
2-3 close Normal (Default)
1
CN9
Normal
(Default)
Pin No.
Enable Front USB Device
1-2 close
Wake up
2-3 close Normal (Default)
33
1
Clear
CMOS
Definition
CN9)
1
Enable
Definition