Ir Transmission Delay; Onboard Parallel Port - Gigabyte GA-6IWMT User Manual

C RxD, TxD Active
8Hi, Hi
Set RxD,TxD Active to Hi, Hi.
8Hi, Lo
Set RxD,TxD Active to Hi, Lo. (Default Value)
8Lo, Hi
Set RxD,TxD Active to Lo, Hi.
8Lo, Lo
Set RxD,TxD Active to Lo, Lo.
C IR Transmission Delay
8Enabled
Enabled IR Transmission delay. (Default Value)
8Disabled
Enabled IR Transmission delay.
C UR2 Duplex Mode
8Full
IR Function Duplex Full.
8Half
IR Function Duplex Half. (Default Value)
C Use IR Pins
8 IR-Rx2Tx2
Enable On Board LPT port and address is 378.(Default Value)
8 RxD2,TxD2
Enable On Board LPT port and address is 278.
C Onboard Parallel port
8378/IRQ7
Enable onboard LPT port and address is 378/IRQ7. (Default Value)
8278/IRQ5
Enable onboard LPT port and address is 278/IRQ5.
83BC/IRQ7
Enable onboard LPT port and address is 3BC/IRQ7.
8Disabled
Disable onboard LPT port.
C Onboard Parallel Mode
8Normal
Using Parallel port as Normal.
8EPP
Using Parallel port as Enhanced Parallel Port.
8ECP
Using Parallel port as Extended Capabilities Port.
8ECP/EPP
Using Parallel port as ECP & EPP mode.
8SPP
Using Parallel port as SPP mode. (Default Value)
- 41 - BIOS Setup