Gigabyte GA-6IWMT User Manual page 44

CKeyboard Power On
This feature allows you to set the method for powering-on the system.
8Password
Allows you to set up to 5 alphanumeric characters to power-on the system.
8 Any Key
allows you to touch the keyboard to power on the system.
8Disabled
Disabled this function. (Default value)
8Keyboard 98
If your keyboard have "POWER Key" button, you can press the key to
power on your system.
CKB Power ON Password
8Enter
Input password (from 1 to 5 characters) and press Enter to set the Key
board Power On Password.
COnboard FDC Controller
8Enabled
Activate onboard floppy controller.(Default value)
8Disabled
Disable floppy function.
COnboard Serial Port 1
8Auto
BIOS will automatically setup the port 1 address.
83F8/IRQ4
Enable onboard Serial port 1 and address is 3F8. (Default value)
82F8/IRQ3
Enable onboard Serial port 1 and address is 2F8.
83E8/IRQ4
Enable onboard Serial port 1 and address is 3E8.
82E8/IRQ3
Enable onboard Serial port 1 and address is 2E8.
8Disabled
Disable onboard Serial port 1.
COnboard Serial Port 2
8Auto
BIOS will automatically setup the port 2 address.
83F8/IRQ4
Enable onboard Serial port 2 and address is 3F8.
82F8/IRQ3
Enable onboard Serial port 2 and address is 2F8. (Default Value)
83E8/IRQ4
Enable onboard Serial port 2 and address is 3E8.
82E8/IRQ3
Enable onboard Serial port 2 and address is 2E8.
8Disabled
Disable onboard Serial port 2.
CUART Mode Select
(This item allows you to determine which Infra Red(IR) function of Onboard I/O chip)
8ASKIR
Set onboard I/O chip UART to ASKIR Mode.
8IrDA
Set onboard I/O chip UART to IrDA Mode.
8 SCR
Set onboard I/O chip UART to SCR Mode.
8Normal
Set onboard I/O chip UART to Normal Mode. (Default Value)
GA-6IWMT(-C) Motherboard - 40 -