Gigabyte GA-6IWMT User Manual page 41

Onboard Parallel Port
Parallel Port Mode
øEPP Mode Select
øECP Mode Use DMA
AC BACK Function
Game Port Address
Midi Port Address
Midi Port IRQ
h i g f: Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
C IDE 1 Conductor Cable
8Auto
Set IDE 1 Conductor cable to auto.(Default value)
8ATA66/100
Set IDE 1 Conductor cable to ATA66/100.
8ATA33
IDE 1 Conductor cable to ATA33.
C IDE 2 Conductor Cable
8Auto
Set IDE 2 Conductor cable to auto.(Default value)
8ATA66/100
Set IDE 2 Conductor cable to ATA66/100.
8ATA33
IDE 2 Conductor cable to ATA33.
COn-Chip Primary PCI IDE
8Enabled
Enable onboard 1st channel IDE port. (Default value)
8Disabled
Disable onboard 1st channel IDE port.
COn-Chip Secondary PCI IDE
8Enabled
Enable onboard 2nd channel IDE port. (Default value)
8Disabled
Disable onboard 2nd channel IDE port.
CIDE Primary Master PIO (for onboard IDE 1st channel)
8Auto
BIOS will automatically detect the IDE HDD Accessing mode.
(Default value)
8Mode0~4
Manually set the IDE Accessing mode.
[378/IRQ7]
[SPP]
EPP1.7
3
[Soft-Off]
[201]
[330]
[10]
Figure 5: Integrated Peripherals
- 37 - BIOS Setup