Gigabyte GA-6VM7A+ User Manual
Gigabyte GA-6VM7A+ User Manual

Gigabyte GA-6VM7A+ User Manual

Socket 370 processor motherboard
Hide thumbs Also See for GA-6VM7A+:

Advertisement

Quick Links

DECLARATION OF CONFORMITY
Per FCC Part 2 Section 2. 1077(a)
Responsible Party Name: G.B.T. INC.
Address: 18305 Valley Blvd., Suite#A
LA Puent, CA 91744
Phone/Fax No: (818) 854-9338/ (818) 854-9339
hereby declares that the product
Product Name:
Mother Board
GA-6VM7A+
Model Number:
Conforms to the following specifications:
FCC Part 15, Subpart B, Section 15.107(a) and Section 15.109(a),
Class B Digital Device
Supplementary Information:
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1)
This device may not cause harmful
and
(2)
this device must accept any inference received, including
that may cause undesired operation.
Representative Person's Name:
ERIC LU
Eric Lu
Signature:
Date:
Feb. 11, 2000
determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna
-Move the equipment away from the receiver
-Plug the equipment into an outlet on a circuit different from that to which
the receiver is connected
-Consult the dealer or an experienced radio/television technician for
additional suggestions
You are cautioned that any change or modifications to the equipment not
expressly approve by the party responsible for compliance could void Your
authority to operate such equipment.
This device complies with Part 15 of the FCC Rules. Operation is subjected to
the following two conditions 1) this device may not cause harmful interference
and 2) this device must accept any interference received, including interference
that may cause undesired operation.
FCC Compliance Statement:
This equipment has been tested and found to
comply with limits for a Class B digital device ,
pursuant to Part 15 of the FCC rules. These
limits are designed to provide reasonable
protection
against
harmful
residential
installations.
generates,
uses,
and
frequency energy, and if not installed and used
in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause interference to radio or
television equipment reception, which can be
interference
in
This
equipment
can
radiate
radio

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GA-6VM7A+ and is the answer not in the manual?

Questions and answers

Summary of Contents for Gigabyte GA-6VM7A+

  • Page 1 This equipment has been tested and found to DECLARATION OF CONFORMITY Per FCC Part 2 Section 2. 1077(a) comply with limits for a Class B digital device , pursuant to Part 15 of the FCC rules. These Responsible Party Name: G.B.T. INC. limits are designed to provide reasonable Address: 18305 Valley Blvd., Suite#A LA Puent, CA 91744...
  • Page 2: Declaration Of Conformity

    Declaration of Conformity We, Manufacturer/Importer G.B.T. Technology Träding GMbH Ausschlager Weg 41, 1F, 20537 Hamburg, Germany declare that the product ( description of the apparatus, system, installation to which it refers) Mother Board is in conformity with (reference to the specification under which conformity is declared) in accordance with 89/336 EEC-EMC Directive EN 55011 Limits and methods of measurement...
  • Page 3 6VM7A+ Socket 370 Processor Motherboard USER'S MANUAL Socket 370 Processor Motherboard REV. 1.0 Second Edition R-10-02-000417...
  • Page 5 How This Manual Is Organized This manual is divided into the following sections: 1) Revision History 2) Item Checklist 3) Features 4) Hardware Setup 5) Performance & Block Diagram 6) BIOS Setup 7) Appendix Manual revision information Product item list Product information &...
  • Page 7: Table Of Contents

    Table Of Content Revision History Item Checklist Summary of Features 6VM7A+ Motherboard Layout Page Index for CPU Speed Setup / Connectors / Panel and Jumper Definition Performance List Block Diagram Memory Installation Page Index for BIOS Setup Appendix P.25 P.26 P.27 P.28 P.55...
  • Page 8: Revision History

    6VM7A+ Motherboard Revision History Revision Revision Note Initial release of the 6VM7A+ motherboard user’s manual. Second release of the 6VM7A+ motherboard user’s manual. The author assumes no responsibility for any errors or omissions that may appear in this document nor does the author make a commitment to update the information contained herein. Third-party brands and names are the property of their respective owners.
  • Page 9: Item Checklist

    Item Checklist Item Checklist The 6VM7A+ motherboard Cable for IDE / floppy device Diskettes or CD (TUCD) for motherboard driver & utility Internal COM B Cable (Optional) Internal USB Cable (Optional) Cable for SCSI device 6VM7A+ user’s manual...
  • Page 10: Summary Of Features

    6VM7A+ Motherboard Summary Of Features 24.3 cm x 21.0 cm micro ATX size form factor, 4 layers Form Factor PCB. Socket 370 processor Intel Pentium FC-PGA Intel Celeron Intel Celeron VIA Cyrix 2nd cache in CPU(Depend on CPU) Chipset VT82C693A VT82C686A Clock Generator ICS 9248DF-39...
  • Page 11: Mouse Interface

    Hardware Monitor CPU / System fan revolution detect CPU / System temperature detect System voltage detect (Vcore,Vcc3,Vcc,+12V) CPU overheat shutdown detect PS/2 Connector  PS/2 BIOS Licensed Award BIOS, 2M bit flash ROM On-Board Sound Creative CT5880 Line In / Line Out / Mic In / AUX In / CD In / TEL / SPDIF / Game port Additional Features Includes 3 fan power connectors.
  • Page 12: 6Vm7A+ Motherboard Layout

    6VM7A+ Motherboard 6VM7A+ Motherboard Layout PS/2 JP19 JP16 PGA 370 VT82C 693A 6VMA7+ AGP 1 PCI1 PCI2 CT5880 PCI3 JP15 BAT1 JP23 BIOS VT82C 686A...
  • Page 13: Page Index For Cpu Speed Setup / Connectors / Panel And Jumper

    Page Index for CPU Speed Setup / Connectors / Panel and Jumper Definition CPU Speed Setup Connectors Game & Audio Port COM A / COM B / LPT Port USB Connector PS/2 Keyboard & PS/2 Mouse Connector JP16 (CPU Fan) JP15 (Power Fan) JP2 (System Fan) ATX Power...
  • Page 14: Cpu Speed Setup

    6VM7A+ Motherboard CPU Speed Setup The system bus speed is selectable at 66,100,133MHz and Auto. The user can select the system bus speed (SW1) and change the DIP switch (SW2) selection to set up the CPU speed for 300 - 866MHz processor. Set System Bus Speed SW1: CPU (MHz)
  • Page 15 For Auto Jumper Setting: Note: 1. If you use 66/100/133 MHz CPU, We recommend you to setup your system speed to “Auto” value. 2. We don’t recommend you to set up your system speed to 75 , 83 , 112 , 124 , 140 ,150 MHz because these frequencies are not the standard specifications for CPU, Chipset most peripherals.
  • Page 16 6VM7A+ Motherboard Celeron 333/ 66 MHz FSB Celeron 366/ 66 MHz FSB Celeron 400/ 66 MHz FSB 5. Celeron 433/ 66 MHz FSB...
  • Page 17 6. Celeron 466/ 66 MHz FSB 7. Celeron 500/ 66 MHz FSB 8. Celeron 533/ 66 MHz FSB 9. Celeron 566/ 66 MHz FSB CPU Speed Setup...
  • Page 18 6VM7A+ Motherboard 10. Cyrix Joshua 300/100MHz FSB 11. Pentium !!! 500/100MHz FSB ® 12. Pentium !!! 550/100MHz FSB ® 13. Pentium !!! 600/100MHz FSB ®...
  • Page 19 14. Pentium !!! 650/100MHz FSB ® 15. Pentium !!! 700/100MHz FSB ® 16. Pentium !!! 750/100MHz FSB ® 17. Pentium !!! 800/100MHz FSB ® CPU Speed Setup...
  • Page 20 6VM7A+ Motherboard 18. Pentium !!! 850/100MHz FSB ® 19. Pentium !!! 533/133MHz FSB ® 20. Pentium !!! 600/133 MHz FSB ® 21. Pentium !!! 667/133MHz FSB ®...
  • Page 21 22. Pentium !!! 733/133MHz FSB ® 23. Pentium !!! 800/133MHz FSB ® 24. Pentium !!! 866/133MHz FSB ® CPU Speed Setup...
  • Page 22: Connectors

    6VM7A+ Motherboard Connectors Game & Audio Port Game Port Line Out Line In COM A / COM B / LPT Port LPT PORT COM A COM B...
  • Page 23: Definition

    USB Connector PS/2 Keyboard & PS/2 Mouse Connector Connectors Pin No. Definition USB V0 USB D0- USB D0+ USB V1 USB D1- USB D1+ 1 2 3 4 PS/2 Mouse PS/2 Keyboard PS/2 Mouse/ Keyboard Pin No. Definition Data VCC(+5V) Clock...
  • Page 24: Jp16: Cpu Fan

    6VM7A+ Motherboard JP16: CPU Fan JP15: Power Fan Pin No. Definition +12V SENSE Pin No. Definition +12V...
  • Page 25: Jp2 (System Fan)

    JP2: Sysem Fan ATX Power Connectors Pin No. Definition +12V SENSE Pin No. Definition 3,5,7,13, 11 1 15-17 1,2,11 3.3V 4,6,19,20 +12V -12V Power Good 20 10 5V SB stand by+5V PS-ON(Soft On/Off)
  • Page 26: Floppy Port

    6VM7A+ Motherboard Floppy Port Red Line FDD1 IDE1(Primary), IDE2(Secondary) Port Red Line IDE 1 IDE 2...
  • Page 27: J7 (Tel)

    J7 : TEL: The connector is for Modem with internal voice connector J5:AUX_IN Connectors Pin No. Definition Signal-In Signal-Out Pin No. Definition AUX-L AUX-R...
  • Page 28: J8 (Cd Audio Line In)

    6VM7A+ Motherboard J8 : CD Audio Line In J4 : SPDIF(The SPDIF output is capable of providing digital audio to external speakers or compressed AC3 data to an external Dolby Digital decoder.) Pin No. Definition CD-L CD-R Pin No. Definition SPDIF OUT...
  • Page 29: Panel And Jumper Definition

    Panel and Jumper Definition J2 : 2x11 Pins Jumper GN (Green Switch) Open: Normal Operation Close: Entering Green Mode GD (Green LED) Pin 1: LED anode(+) Pin 2: LED cathode( ) HD (IDE Hard Disk Active LED) Pin 1: LED anode(+) Pin 2: LED cathode( ) SPK (Speaker Connector) Pin 1: VCC(+)
  • Page 30: Jp1 (Clear Cmos Function)

    6VM7A+ Motherboard JP1 : Clear CMOS Function JP3 : Onboard Sound Function Selection Pin No. Definition 1-2 close Normal (Default) 2-3 close Clear CMOS Pin No. Definition 1-2 close Onboard Sound Enable(Default) 2-3 close Onboard Sound Disable...
  • Page 31: Jp23 (Case Open)

    JP23 : Case Open JP19 : Support Cyrix CPU Selection(Optional) Panel and Jumper Definition Pin No. Definition Signal Pin No. Definition open Normal close Support Cyrix 133MHz...
  • Page 32: Bat1(Battery)

    6VM7A+ Motherboard BAT1 : Battery Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions.
  • Page 33: Performance List

    Performance List The following performance data list is the testing results of some popular benchmark testing programs. These data are just referred by users, and there is no responsibility for different testing data values gotten by users. (The different Hardware & Software configuration will result in different benchmark testing results.) ®...
  • Page 34: Block Diagram

    6VM7A+ Motherboard Block Diagram PGA 370 CPU AGP 2X AGP Bus VT82C693A Ultra DMA 33/ATA66 IDE Ports PCI Bus IDE Bus VT82C686A AC’97-Link Creative CT5880 AC97 CODEC Slot USB Port 14.318MHz 3.3V DIMM DIMM Sockets Host Bus 33 MHz 9248DF-39 33 MHz 24MHz 48MHz...
  • Page 35: Memory Installation

    Memory Installation The motherboard has 2 dual inline memory module (DIMM) sockets. The BIOS will automatically detects memory type and size. To install the memory module, just push it vertically into the DIMM Slot .The DIMM module can only fit in one direction due to the two notch. Memory size can vary between sockets.
  • Page 36: Page Index For Bios Setup

    6VM7A+ Motherboard Page Index for BIOS Setup The Main Menu Standard CMOS Setup BIOS Features Setup Chipset Features Setup Power Management Setup PNP/ PCI Configuration Load BIOS Defaults Load Performance Defaults Integrated Peripherals Supervisor Password / User Password IDE HDD Auto Detection SAVE &...
  • Page 37: Entering Setup

    BIOS Setup BIOS Setup is an overview of the BIOS Setup Program. The program that allows users to modify the basic system configuration. This type of information is stored in battery-backed CMOS RAM so that it retains the Setup information when the power is turned off. ENTERING SETUP Power ON the computer and press <Del>...
  • Page 38: Getting Help

    6VM7A+ Motherboard GETTING HELP Main Menu The on-line description of the highlighted setup function is displayed at the bottom of the screen. Status Page Setup Menu / Option Page Setup Menu Press F1 to pop up a small help window that describes the appropriate keys to use and the possible selections for the highlighted item.
  • Page 39 Chipset Features Setup This setup page includes all the items of chipset special features. Power Management Setup This setup page includes all the items of Green function features. PnP/PCI Configurations This setup page includes all the configurations of PCI & PnP ISA resources. Load BIOS Defaults Bios Defaults indicates the value of the system parameter which the system would be in the safe configuration.
  • Page 40: Standard Cmos Setup

    6VM7A+ Motherboard Standard CMOS Setup The items in Standard CMOS Features Menu (Figure 2) are divided into 9 categories. Each category includes no, one or more than one setup items. Use the arrows to highlight the item and then use the <PgUp> or <PgDn> keys to select the value you want in each item. ROM PCI / ISA BIOS (2A6LGG0T) CMOS SETUP UTILITY AWARD SOFTWARE, INC.
  • Page 41 IDE Primary Master, Slave / Secondary Master, Slave The category identifies the types of hard disk from drive C to F that has been installed in the computer. There are two types: auto type, and user definable type. User type is user-definable;...
  • Page 42 6VM7A+ Motherboard Video The category detects the type of adapter used for the primary system monitor that must match your video display card and monitor. Although secondary monitors are supported, you do not have to select the type in setup. EGA/VGA Enhanced Graphics Adapter/Video Graphics Array.
  • Page 43 Extended Memory The BIOS determines how much extended memory is present during the POST. This is the amount of memory located above 1 MB in the CPU's memory address map. Other Memory This refers to the memory located in the 640 K to 1024 K address space. This is memory that can be used for different applications.
  • Page 44: Bios Features Setup

    6VM7A+ Motherboard BIOS Features Setup ROM PCI / ISA BIOS (2A6LGG0T) CMOS SETUP UTILITY AWARD SOFTWARE, INC. Virus Warning : Disabled Process Number Feature : Enabled Boot From LAN First : Disabled Boot Sequence : A,C,SCSI VGA Boot From : AGP Boot Up Floppy Seek : Enabled Boot Up NumLock Status...
  • Page 45 Boot From LAN First Enabled Enable Boot From LAN First. Disabled Disable Boot From LAN First. (Default Value) Auto Auto detect Boot From LAN First. You can set “Auto” or “Enabled” to boot from LAN first. Boot Sequence This category determines which drive computer searches first for the disk operating system (i.e., DOS).
  • Page 46 6VM7A+ Motherboard Typematic Rate Setting Enabled Enable Keyboard Typematic rate setting. Disabled Disable Keyboard Typematic rate setting. (Default Value) Typematic Rate (Chars / Sec.) 6-30 Set the maximum Typematic rate from 6 chars. Per second to 30 characters. Per second. (Default Value: 6 ) Typematic Delay (Msec.) 250-1000 Set the time delay from first key to repeat the same key in to computer...
  • Page 47: Chipset Features Setup

    Chipset Features Setup ROM PCI / ISA BIOS (2A6LGG0T) CMOS SETUP UTILITY AWARD SOFTWARE, INC Top Performance :Disabled SDRAM Cycle Length DRAM Clock :Host CLK Read Around Write :Enabled Concurrent PCI/Host :Disabled AGP Aperture Size :64M OnChip Sound :Auto OnChip Modem :Auto Spread Spectrum :Disabled...
  • Page 48 6VM7A+ Motherboard Read Around write When set Enabled this feature speeds up data read performance. Enabled (Default Value) Disabled Normal operation. Concurrent PCI/Host Enabled Concurrent PCI/Host. Enabled Disabled Disabled Concurrent PCI/Host. (Default Value) AGP Aperture Size Set AGP Aperture Size to 4MB. Set AGP Aperture Size to 8 MB.
  • Page 49 Shutdown Temp. ( C / F) (This function will be effective only for the operating systems that support ACPI Function.) Disabled Normal Operation. 60 C / 140 F Monitor CPU Temp. at 60 C / 140 F, if Temp. > 60 C / 140 F system will automatically power off .
  • Page 50: Power Management Setup

    6VM7A+ Motherboard Power Management Setup ROM PCI / ISA BIOS (2A6LGG0T) CMOS SETUP UTILITY AWARD SOFTWARE, INC Power Management :Enabled Video Off Method :DPMS Support Soft-Off by PWRBTN :Instant-Off PWRON After PW-Fail :Formar-Sts CPU FAN In Suspend :Off HDD Power Down :Disabled Suspend Mode :Disabled...
  • Page 51 PWRON After PW-Fail Former-Sts Set Restore on AC/Power Loss is Former-Sts mode. (Default Value) Set Restore on AC/Power Loss is Power on. Set Restore on AC/Power Loss is Power off. CPU FAN In Suspend Disable this function. Stop CPU FAN when entering Suspend mode. (Default Value) HDD Power Down Disabled Disabled HDD Power Down mode function.
  • Page 52 6VM7A+ Motherboard Wake Up On RI# Enable Wake Up On LAN/Ring. (Default Value) Enabled Disabled Disable Wake Up On LAN/Ring. Wake Up On PME# Enable Wake Up On PME#.(Default Value) Enabled Disabled Disable Wake Up On PME#. RTC Alarm Resume You can set “RTC Alarm Resume”...
  • Page 53 PNP/PCI Configurations ROM PCI / ISA BIOS (2A6LGG0T) CMOS SETUP UTILITY AWARD SOFTWARE, INC. PNP OS Installed Resources Controlled By :Auto Reset Configuration Data :Disabled IRQ-3 assigned to :PCI/ISA PnP IRQ-4 assigned to :PCI/ISA PnP IRQ-5 assigned to :PCI/ISA PnP IRQ-7 assigned to :PCI/ISA PnP IRQ-9 assigned to...
  • Page 54 6VM7A+ Motherboard IRQ (3,4,5,7,9,10,11,12,14,15), DMA(0,1,3,5,6,7) assigned to IRQ[3.4.5.7.9.10.11.12.14.15] & DMA[0.1.3.5.6.7]These items will show up when “Resources Controlled By” is Manual. PCI/ISA PnP The resource is used by PCI/ISA PnP device (PCI or ISA). Legacy ISA The resource is used by Legacy ISA device. Assign IRQ For USB Enabled Assign a specific IRQ for USB.
  • Page 55: Pnp/Pci Configuration

    Load BIOS Defaults ROM PCI / ISA BIOS (2A6LGG0T) CMOS SETUP UTILITY AWARD SOFTWARE, INC. STANDARD CMOS SETUP BIOS FEATURES SETUP CHIPSET FEATURES SETUP POWER MANAGEMENT SETUP PNP/PCI CONFIGURATION Load BIOS Defaults (Y/N) ? N LOAD BIOS DEFAULTS LOAD PERFORMANCE DEFAULTS ESC : Quit F10 : Save &...
  • Page 56: Load Performance Defaults

    6VM7A+ Motherboard Load Performance Defaults ROM PCI / ISA BIOS (2A6LGG0T) CMOS SETUP UTILITY AWARD SOFTWARE, INC. STANDARD CMOS SETUP BIOS FEATURES SETUP CHIPSET FEATURES SETUP POWER MANAGEMENT SETUP PNP/PCI CONFIGURATION Load Performance Defaults (Y/N) ? N LOAD BIOS DEFAULTS LOAD PERFORMANCE DEFAULTS ESC : Quit F10 : Save &...
  • Page 57: Integrated Peripherals

    Integrated Peripherals ROM PCI / ISA BIOS (2A6LGG0T) CMOS SETUP UTILITY AWARD SOFTWARE, INC. USB Controller : Enabled USB Keyboard Support : Disabled OnBoard Serial Port 1 : Auto OnBoard Serial Port 2 : Auto OnBoard Parallel Port :378/IRQ7 OnBoard Parallel Mode :SPP Figure 9: Integrated Peripherals USB Controller...
  • Page 58 6VM7A+ Motherboard Onboard Serial Port 2 Auto BIOS will automatically setup the port 2 address. (Default Value) 3F8/IRQ4 Enable onboard Serial port 2 and address is 3F8. 2F8/IRQ3 Enable onboard Serial port 2 and address is 2F8. 3E8/IRQ4 Enable onboard Serial port 2 and address is 3E8. 2E8/IRQ3 Enable onboard Serial port 2 and address is 2E8.
  • Page 59: Set Supervisor / User Password

    Set Supervisor / User Password When you select this function, the following message will appear at the center of the screen to assist you in creating a password. ROM PCI / ISA BIOS (2A6LGG0T) CMOS SETUP UTILITY AWARD SOFTWARE, INC. STANDARD CMOS SETUP BIOS FEATURES SETUP CHIPSET FEATURES SETUP...
  • Page 60: Ide Hdd Auto Detection

    6VM7A+ Motherboard IDE HDD AUTO Detection ROM PCI / ISA BIOS (2A6LGG0T) CMOS SETUP UTILITY AWARD SOFTWARE, INC. HARD DISKS TYPE SIZE CYLS HEAD PRECOMP LANDZ SECTOR MODE Primary Master : Select Primary Master Option (N=Skip):N OPTION SIZE CYLS HEAD 2(Y) 4548 4552...
  • Page 61: Save & Exit Setup

    Save & Exit Setup ROM PCI / ISA BIOS (2A6LGG0T) CMOS SETUP UTILITY AWARD SOFTWARE, INC. STANDARD CMOS SETUP BIOS FEATURES SETUP CHIPSET FEATURES SETUP POWER MANAGEMENT SETUP PNP/PCI CONFIGURATION LOAD BIOS DEFAULTS SAVE to CMOS EXIT (Y/N)? Y LOAD PERFORMANCE DEFAULTS ESC : Quit F10 : Save &...
  • Page 62: Exit Without Saving

    6VM7A+ Motherboard Exit Without Saving ROM PCI / ISA BIOS (2A6LGG0T) CMOS SETUP UTILITY AWARD SOFTWARE, INC. STANDARD CMOS SETUP BIOS FEATURES SETUP CHIPSET FEATURES SETUP POWER MANAGEMENT SETUP Quit Without Saving (Y/N) ? N PNP/PCI CONFIGURATION LOAD BIOS DEFAULTS LOAD PERFORMANCE DEFAULTS ESC : Quit F10 : Save &...
  • Page 63: Appendix

    Appendix Appendix A: VIA Series VT82C686A Chipsets Driver Installation A. VIA 4 in 1 Service Pack Utility: Insert the support CD that came with your motherboard into your CD-ROM driver or double –click the CD driver icon in My Computer to bring up the screen. 1.Click “VIA 4in 1 Service Pack Utility”...
  • Page 64 6VM7A+ Motherboard 6.Click “Next”. 8.Click “Next”. (11) 7.Click “Next”. 9.Click “Next”. (10) 10.Click “Finish” to Restart Computer. (12)
  • Page 65 B. Hardware Monitor: Insert the support CD that came with your motherboard into your CD-ROM driver or double –click the CD driver icon in My Computer to bring up the screen. 1.Click “Hardware Monitor” item. 2.Click 4.Click “Next” to Finish. Appendix 3.Click “Next”.
  • Page 66 6VM7A+ Motherboard Appendix B: Creative Sound Driver Installation Insert the support CD that came with your motherboard into your CD-ROM driver or double –click the CD driver icon in My Computer to bring up the screen. 1.Click here. 3.Click “OK”. 5.Click “Next”.
  • Page 67 7.Click here. 8.Click “Finish” to Restart Computer. Appendix...
  • Page 68 C:\utility\ AWDFlash or AMIFlash <filename of the BIOS binary file intended for flashing> Once the process is finished, reboot the system Note: Please download the newest BIOS from our website (www.gigabyte.com.tw) or contact your local dealer for the file.
  • Page 69 Appendix D: Acronyms Acor. Meaning ACPI Advanced Configuration and Power Interface POST Power-On Self Test Local Area Network Extended Capabilities Port Advanced Power Management Direct Memory Access Megahertz ESCD Extended System Configuration Data Central Processing Unit Symmetric Multi-Processing Universal Serial Bus Operating System Error Checking and Correcting Integrated Dual Channel Enhanced...
  • Page 70 6VM7A+ Motherboard Acor. Meaning Peripheral Component Interconnect RIMM Rambus in-line Memory Module Dual Retention Mechanism Industry Standard Architecture Memory Translator Hub CRIMM Continuity RIMM...

Table of Contents