Advertisement
Battery Change:
It is recommended to replace the batteries in the unit
approximately every 3 years to ensure optimum accuracy.
FUNCTION KEYS
The simple design of this product features 2 keys.
RESET/+ Key:
• Press for 5 seconds to reset the TOTAL rainfall data "0".
• Press and release to advance the value for the alarm.
ALM/SET:
• Press for 2 seconds to activate/deactivate alarm
• Press for 5 seconds to enter alarm setting
OPERATIONS
Setting the Alarm
• Press and hold the ALM/SET button until the alarm is flashing
on the bottom screen.
• Advance the alarm value by pressing and releasing the
RESET/+ button.
• Alarm can be set in 0.05" increments from 0.05" to 4.00"
• The icon ((•)) will appear when the alarm is turned ON.
• Press and release ALM/SET button to turn the alarm off.
• To view the alarm pres and hold the ALM/SET button. This
will cause the receiver to beep if the set alarm value has
already been reached.
Resetting TOTAL RAINFALL and 24 HOUR RAINFALL
• Total Rainfall: Press and hold the RESET/+ button. The
receiver will beep, and the total rainfall will reset to 0.00".
• 24 Hour Rainfall: The 24 Hour Rainfall will reset to 0.00"
every 24 hours. To reset the 24 Hour Rainfall to 0.00" in-
between the 24 hour automatic reset, you must remove the
batteries, wait 2 minutes, and then re-insert the batteries.
Note: Removing the batteries will reset the Total Rainfall as well
as the 24 Hour Rainfall.
6
Advertisement
