SNOWJOE SUNJOE SPX6000C-CT Operator's Manual page 7

Unpacking
Carton Contents
• Water bucket assembly
• Base unit
• Trigger gun
• Spray wand
• Four (4) Quick-Connect nozzles (0º, 15º, 25º, and 40º)
• Needle clean-out tool
• Soap dispenser attachment
• Trigger gun holder
• High-pressure hose
• Garden hose adapter (female coupler)
• Manuals with registration card
NOTE: In order to operate this pressure washer, you will need
to additionally purchase either the EcoSharp
the EcoSharp PRO (model iBAT40XR) lithium-ion battery or
®
the EcoSharp PRO (model iBAT40XRP) lithium-ion battery
®
and either the EcoSharp charger (model iCHRG40) or the
®
EcoSharp charger (model iCHRG40-DPC).
®
1. Carefully remove the pressure washer and check to see
that all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you find damaged or
missing parts, DO NOT return the unit to the store. Please
call the Snow Joe + Sun Joe
®
1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use your new cordless
pressure washer. The packaging is made of recyclable
materials. Properly dispose of these materials in
accordance with local regulations.
IMPORTANT! The equipment and packaging material are
not toys. Do not let children play with plastic bags, foils,
or small parts. These items can be swallowed and pose a
suffocation risk!
m
WARNING!
Do not insert the battery until assembly is
complete. Failure to comply could result in accidental starting
and possible serious personal injury.
(model iBAT40),
®
customer service center at
®
7
Assembly
1. The washer must be used on a secure and stable surface
in a standing, upright position (Fig. 1).
Fig. 1
2. Open the bucket lid, take the base unit out from the
bucket (Fig. 2).
Fig. 2
3. Insert the trigger gun holder onto the bucket (Fig. 3).
Bucket lid
Base unit
Bucket