Table of Contents
Advertisement
5.
Place the SATA/SAS storage
device into the storage device tray
then secure it with four screws.
6.
Insert the storage device tray and
storage device assembly all the
way into the depth of the bay until
just a small fraction of the tray
edge protrudes.
7.
Push the tray lever until it clicks
and secures the storage device
tray in place.
8.
Repeat steps 1 to 7 to install the
other storage devices.
9.
Remove the two default OCuLink
cables (A) and connect it to the
backplane (B).
2-22
Chapter 2: Hardware Setup
Advertisement
Table of Contents
