Commissioning After Taking Out Of Operation - ABB A135-M65 Operation Manual

Operation Manual / A130-M.. - A145-M..
5 Commissioning
5.3

Commissioning after taking out of operation

If present
Remove cover plates (blind flanges) on the compressor casing, on the gas-inlet as well as

on the gas-outlet.
Remove the screw plugs on the water connections and fit the water pipe.

Version with compressor wheel cooling:
Remove the screw plug on the cooling air connection and fit the cooling air line.

General
Check the exhaust gas pipe before and after the turbine for combustion residues or water

residues and clean it. Remove any foreign objects that may be present.
Check and clean filter silencer or air supply line, and remove any foreign objects that may

be present.
Put engine-side oil circulation to the turbocharger into operation.

Prepare the turbocharger for operation according to section "Checks before commission-

ing".
Start the engine and put the turbocharger into operation.

© Copyright 2013 ABB. All rights reserved. HZTL2413_EN
Page 45 / 113
Revision B
March 2013