Replacing The System Outer Foil And The Inner Blades; Replacement Parts - Panasonic ES-BSL4 Operating Instructions Manual

Replacing the system outer foil and
the inner blades
system outer foil
inner blades
Removing the outer foil section
Press the foil frame release button and lift the outer
foil section upwards.
Attaching the outer foil section
After turning the water inlet surface to
the front, securely attach the outer foil
section to the shaver until it clicks.
►Replacing the system outer foil
1. Press the system outer foil release
buttons and pull down the system
outer foil.
2. Align the water inlet surface and the
system outer foil mark ( ) and
securely attach together.
• The system outer foil cannot be
reversely attached.
• Always insert the system outer foil
to the foil frame when attaching to
the shaver.
ES-SL41_CH.indb 15
once every year
once every two years
2
1
►Replacing the inner blades
1. Remove the inner blades one at a
time.
• Do not touch the edges (metal
parts) of the inner blades to
prevent injury to your hand.
2. Insert the inner blades one at a time
until they click.

►Replacement parts

Replacement parts are available at your dealer or
Service Center.
Replacement parts
System outer foil
for ES-SL41,ES-BSL4,
ES-BSL2
Inner blades
Removing the built-in rechargeable battery
Remove the built-in rechargeable battery before
disposing of the shaver. Please make sure that the
battery is disposed of at an officially designated
location if there is one. Do not dismantle or replace the
battery so that you can use the shaver again. This
could cause fire or an electric shock.
Please contact an authorised service center.
• Remove the shaver from the AC adaptor when
removing the battery.
• Please take care not to short-circuit the battery.
WES9087
WES9068
15
2012/03/22 9:34:33