Table of Contents
Advertisement
▼
To remove light dirt
4. Slide the cleaning
shutter until it clicks.
5. Clean the outer foil
section with running
water.
6. T
urn the shaver off.
•
Rinse with water and
shake up and down
several times to
remove the water.
•
Be careful not to hit the main body on the sink or
any other object while draining the water. Failure
to do so may cause malfunction.
▼
14
ES-SL41_CH.indb
14
▼
For heavy dirt
4. Turn the shaver off
after 10 - 20 seconds.
5. Remove the outer foil
section and turn the
shaver on.
6. Clean the shaver and
the outer foil section
with running water.
• Rinse with water and
shake up and down
several times to
remove the water.
▼
7. Wipe off any drops of water with a
dry cloth.
8. Dry the outer foil section and the
shaver completely in a shaded
area.
• Open the cleaning shutter.
• The outer foil section will dry
faster if removed from the main
body.
9. Attach the outer foil section to the
shaver.
Cleaning with the brush
Clean the system outer foil,
the shaver body and the
trimmer (ES - SL41/ES - BSL4)
using the long brush.
Clean the inner blades using
the short brush by moving it
in direction (A).
• Do not move the short brush
in direction (B) as it will
damage the inner blades
and affect their sharpness.
• Do not use the short brush
to clean the outer foils.
8
ES - BSL4
(A)
(B)
2012/03/22
9:34:32
Advertisement
Table of Contents
