Connections; Connecting To Television; Using Composite Video Sockets (Cvbs); Using Component Video Sockets (Ypbpr) - Magnavox MDV435/77 User Manual

Connections

Connecting to television

IMPORTANT!
– You only need to make one video
connection from the following
options, depending on the
capabilities of your television.
– Connect the DVD player directly
to the television.
Using Composite Video sockets
(CVBS)
A
Use the composite video cable (yellow)
to connect the DVD player's CVBS
(VIDEO) socket to the video input jack
(or labeled as A/V In, Video In,
Composite or Baseband) on the
television (cable supplied).
B
To hear sound of this DVD player
through your TV, use the audio cables
(white/red) to connect AUDIO OUT (L/
R) sockets of the DVD player to the
corresponding AUDIO IN sockets on the
television (cable supplied).
TIPS: Before making or changing any connections, make sure that all the devices are disconnected from
the power outlet.
8
01-31 MDV435_436_55_eng_RC2.indd 8 01-31 MDV435_436_55_eng_RC2.indd 8
COMPONENT
VIDEO IN
S-VIDEO
IN V (Pr/Cr)
AUDIO
OUT
U (Pb/Cb)
VIDEO IN
Y
2
DIGITAL
OUT
AUDIO OUT COAXIAL
IMPORTANT!
– The progressive scan video quality
is only possible when using YPbPr
and a progressive scan television is
required.
Using Component Video sockets
(YPbPr)
A
Use the component video cables (red/
blue/green) to connect the DVD player's
YPbPr sockets to the component video
input sockets (or labeled as YPbPr) on
the television (cable not supplied).
B
To hear sound of this DVD player
through your TV, use the audio cables
(white/red) to connect AUDIO OUT (L/
R) sockets of the DVD player to the
corresponding AUDIO IN sockets on the
television (cable supplied).
C
Proceed to page 14 for detailed
progressive scan setup.
COMPONENT
VIDEO IN
S-VIDEO
IN
V (Pr/Cr)
AUDIO
IN
U (Pb/Cb)
VIDEO IN
Y
1
VIDEO OUT
2006-04-27 5:31:14 PM 2006-04-27 5:31:14 PM