Magnavox MDV2100 - Dvd Player Setup Manual

Also See for MDV2100:

Specifications (2 pages)

Owner's manual (20 pages)

Table of Contents

Contents

1 CONNECTIONS
2 INITIAL SETUP
3 REMOTE CONTROL
4 TROUBLESHOOTING
5 SERVICING
6 PLAYABLE DISCS
7 UNPLAYABLE DISCS
8 SPECIFICATIONS
9 REGION CODES
10 Documents / Resources
- 10.1 References
- 10.2 Download manual

Magnavox MDV2100 - Dvd Player Setup Manual

CONNECTIONS

INITIAL SETUP

REMOTE CONTROL

INSERT BATTERIES
Install 2 AA (1.5V) batteries

Press to turn on the unit, or to switch the unit into standby mode. (To completely turn off the unit, you must unplug the AC power cord.)
To display the current disc mode.
To select audio language. (DVD) To select sound mode. (CD)
To select subtitle language on a disc. (DVD)
To select camera angles on a disc. (DVD) Para seleccionar los ángulos de la cámara
To play back repeatedly.
To remove status number in program input. To clear the numbers entered incorrectly. To cancel the point for A-B repeat.
To repeat between your chosen point of A and B.
To pause disc playback. To advance playback one frame at a time. (DVD)
To start playback or resume playback.
To search forward / backward through a disc. To begin slow forward playback in the pause mode. (DVD)
To stop playback.
To call up the title menu on a disc. (DVD)
To call up the setup menu.

To arrange the playing order or play randomly.
To set black level on/off.
To set virtual surround on / off. (DVD)
To magnify part of a picture. (DVD)
To open or close the disc tray. To turn on the unit.
To search chapter, title, tracks, files, folders or time.
To enter values in the input field. To select chapter, title, file, folder and track directly.
To skip chapters, titles, tracks, files and folders.
To move the cursor and determine its position.
To call up the menu on a disc. (DVD)
To select items or settings.
To return to the previously displayed menu screen.

If you have any questions or issues with our product, please refer to the "TROUBLESHOOTING" section of this "SETUP MANUAL", or visit our website for the Online Owner's Manual at www.magnavox.com. If additional support is required please contact our Customer Service line at 1-800-605-8610.
MAGNAVOX is a registered trademark of Philips Electronics North America Corporation and is used by Funai Electric Co. Ltd. and Funai Corporation, Inc. under license from Philips Electronics North America.

TROUBLESHOOTING

Problem	Tip
No power	Check if the AC power cord is properly connected. Unplug the outlet once, and wait for 5-10 seconds and then plug it in again.
No sound or picture	Check if the TV is switched on. Check the video connection. Check the audio / video cable connections to the TV.
Distorted picture	Sometimes a small amount of picture distortion may appear. This is not a malfunction. Connect the unit directly to the TV. Set "PROGRESSIVE" correctly in "DISPLAY" menu. Turn it on only if your TV has progressive scan and you are using the component video connections between the unit and the TV. Disable progressive scan for all other connections. Press and hold [PLAY] on the front panel for 5 seconds to change back to default output.
Completely distorted picture or black / white picture with DVD	Connect this unit directly to the TV. Make sure the disc is compatible with the unit.
No sound or distorted sound	Adjust the volume. Check that the speakers are connected correctly.
No audio at digital output	Check the digital connections. Check if the audio format of the selected audio language matches your receiver capabilities.
No DTS audio is output	This unit does not support DTS audio. This is not a malfunction.
Picture freezes momentarily during playback.	Check the disc for fingerprints / dirty and clean with a soft cloth wiping from center to edge.
Disc cannot be played back	Clean the disc. Ensure the disc is inserted in correct direction. Check if the disc is defective by trying another disc. Cancel the parental lock or change the control level. Insert a correct disc that plays back on this unit.
No return to startup screen when disc is removed.	Reset the unit by switching off the unit, then on again.
The unit does not respond to the remote control.	Aim the remote control directly at the sensor on the front panel. Reduce the distance to the unit. Replace the batteries in the remote control. Re-insert the batteries with their polarities (+ / – signs) as indicated.
Buttons do not work or the unit stops responding.	To completely reset the unit, unplug the AC cord from the AC outlet for 5-10 seconds.
The unit cannot read CD / DVD	Use a commonly available cleaning CD / DVD to clean the lens before sending the unit for repair.
Angle does not switch.	The angle cannot be switched for DVD which do not contain multiple angles. In some cases multiple angles are only recorded for specific scenes.
Playback does not start when the title is selected.	Check the "PARENTAL" setting.
The password for rating level has been forgotten.	Enter the default password "4737", then your forgotten password will be cleared.

SERVICING

Please refer to relevant topics on "TROUBLESHOOTING" in the Online Owner's Manual before returning the product.
If this unit becomes inoperative, do not try to correct the problem by yourself. There are no user-serviceable parts inside. Eject the disc (if possible), place the unit into the standby mode, unplug the power plug, and please contact: 1-800-605-8610 or visit: www.magnavox.com/support

PLAYABLE DISCS

Type of media	Mark (logo)
DVD-video
DVD-RW DVD-R
DVD+RW DVD+R
audio CD
CD-RW CD-R

UNPLAYABLE DISCS

DVD-RAM
photo CD
HD DVD
DVD-audio
video CD
super audio CD
CD-i
DTS-CD
Blu-ray Disc™
DVD with region codes other than 1 or ALL
DVD-ROM for personal computers
CD-ROM for personal computers

SPECIFICATIONS

General
Signal system	NTSC Color
Power requirements	120 V AC +/- 10%, 60 Hz +/- 0.5 %
Power consumption	7 W (standby: 0.9 W)
Dimensions (width x height x depth)	8.3 x 2.0 x 9.7 inches (210 x 50 x 245 mm)
Weight	1.80 lbs. (0.80 kg)
Operating temperature	41°F (5°C) to 104°F (40°C)
Operating humidity	Less than 80% (no condensation)
Connection Specifics
Audio output (Analog) (RCA jack x 2)	L/R: 2 Vrms (output impedance: more than 1kΩ)
Video output (RCA jack x 1)	1 Vp-p (75Ω)
S-video output (Mini DIN 4-pin x 1)	Y: 1Vp-p (75Ω) C: 286mVp-p (75Ω)
Component video output (RCA jack x 3)	Y: 1Vp-p (75Ω) PB/CB: 700mVp-p (75Ω) PR/CR: 700mVp-p (75Ω) p p ( )

Note

The specifications and design of this product are subject to change without notice.

REGION CODES

This unit has been designed to play back DVD-video with region "1" or "ALL". You cannot play back DVD-video that are labeled for other regions. Look for the symbols on your DVD-video. If these region symbols do not appear on your DVD-video, you cannot play back the disc in this unit. The letter or number inside the globe refers to region of the world. A DVD-video labeled for a specific region can only be played back in the unit with the same region code.