K
Lower the envelope lever, and then press [Exit].
Do not lower the envelope lever while the machine is in operation.
L
Place the original, and then press the {Start} key.
M
When the copy job is finished, press the {Clear Modes} key to clear the set-
tings.
N
Lift the envelope lever.
Note
❒ When copying on an envelope that has the flap on the short edge, select
[Custom Size] in step
size (Vert.) of the original. Do not add the length of the flap.
ALZ041S
F
, enter the horizontal size (Horiz.) and the vertical
Copying from the Bypass Tray
2
33