Table of Contents
Advertisement
A
Open the bypass tray.
B
Open the one-sheet bypass tray.
C
Open the one-sheet output tray.
D
Insert an OHP transparency face-up, and then align the paper guide to the
paper size.
Be sure to load OHP transparencies in the orientation K.
E
Press the {q} key.
F
Select [Paper Type] using {U} or {T}, and then press the {OK} key.
G
Select [OHP (Transparency)] using {U} or {T}, and then press the {OK} key.
H
Select the paper size.
I
Place the originals, and then press the {Start} key.
J
When the copy job is finished, press the {Clear Modes} key to clear the set-
tings.
Note
❒ For OHP transparencies, print speed is slower when compared to printing
on plain paper.
ALZ045S
Copying from the Bypass Tray
2
27
Advertisement
Table of Contents
