Table of Contents
Advertisement
Using the chronograph
The chronograph on this watch can measure up to 23 hours 59 minutes 59 seconds
by 1 second.
56
1
Change the mode to [ CHR ] and push the crown in to
position 0 .
0 second is indicated.
2
Start measurement.
• See the next page for the method of measurement.
• Pulling out the crown will stop and reset the chronograph.
3
Change the mode to [ TME ] and push the crown in to
position 0 to finish the procedure.
The second hand returns to indicate the second.
Advertisement
Table of Contents
