Citizen F990 Instructions

Citizen F990 Instructions

Hide thumbs Also See for F990:

Advertisement

Quick Links

English
• This watch is solar-powered. Expose the dial to light and use it sufficiently charged.
• To see details of charging time, specifications and operations, refer to the instruction manual:

Component identification

Hands and buttons
Hour
hand
Function
indication
Second
hand
Dual time
indication
• Actual appearance may differ from the illustration.
• The crown has two positions when pulling it out.

Changing the mode

1.
Pull the crown out to position 1 .
The second hand points to 30 seconds and stops.
2.
Rotate the crown to set a mode name on the mode
◄ marker.
indication to the
• Set the mode name you want horizontal.
3.
Push the crown in to position 0 to finish the
procedure.
The watch changes indication according to the selected mode.
F990 Abbreviated instruction
Minute hand
60
LON
0
Button
B
Mode indication
Crown
Button
A
30
Date
indication
Crown's position
0 1 2
F990 instruction manual
Indication
Function indication
• Day of week
• Power reserve
level (5 levels)
• Summer time
setting (SMT
ON/OFF)
Alarm setting
(ALM ON/OFF)

Checking the power reserve

You can see current power reserve amount by referring to the power reserve
indication.
1.
Change the mode to [TME] or [UTC] and push the crown in
to position 0 .
2.
Press and release the upper right button B .
Marker
of mode
The function indication indicates the power reserve in level and the second
indication
hand points the current time zone setting of the home time.
• The power reserve level is always shown in the [LLI] mode.
Level
Indication
About 1.5 -
Duration
1.2 years
Power
reserve is
Meaning
sufficient.
OK for normal use
3.
Press and release the upper right button B to finish the
procedure.
The second hand returns to indicate the second.
• The hand returns automatically in 10 seconds without pressing the button.
60
LON
0
30
4
3
2
About 1.2
About 10 - 4
years - 10
months
months
Power reserve is OK.
Reception-in-progress
indication (RX-TME/
RX-GPS)
Reception result
indication (OK/NO)
Power
generation
amount
indication (7
levels)
Mode
indication
Place name/time
zone
1
0
About 4
5 days or
months - 5
shorter
days
Insufficient
Power
charge
reserve is
warning has
getting low.
started.
Charge immediately.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the F990 and is the answer not in the manual?

Questions and answers

Summary of Contents for Citizen F990

  • Page 1 F990 Abbreviated instruction English • This watch is solar-powered. Expose the dial to light and use it sufficiently charged. • To see details of charging time, specifications and operations, refer to the instruction manual: F990 instruction manual Component identification Hands and buttons...
  • Page 2 F990 Abbreviated instruction Checking power generation amount (Light-Level Indicator) Receiving the satellite time signal • To cancel the reception, press and hold any button until the second hand Change the mode to [LLI] and push the crown in to position returns to indicate the second.
  • Page 3 F990 Abbreviated instruction Setting the world time manually Interchanging the home time and local time This watch can indicate the time around the world according to which of 39 time Change the mode to [TME] or [LLI] and push the crown in to zones (offsets from UTC —...
  • Page 4 F990 Abbreviated instruction Checking and adjusting the leap second setting Adjusting the time and calendar manually • The leap second setting is adjusted automatically but it can be adjusted You can set the time and calendar of the home time manually.
  • Page 5 F990 Abbreviated instruction Checking the reference position Resetting the watch — All Reset Change the mode to [CHR] and pull the crown out to position Change the mode to [CHR] and pull the crown out to position The second hand and dual time indication point to 0 position and stop.

Table of Contents