Type Of Original - Gestetner CP6244 Operating Instructions Manual

Gestetner cp6244: operating instruction
Hide thumbs Also See for CP6244:
Table of Contents

Advertisement

Operation

Type of Original

Select from the following original
types to match your originals:
1
❖ ❖ ❖ ❖ Letter mode
Use this mode when the original
contains only text (no pictures).
❖ ❖ ❖ ❖ Letter/Photo mode
Use this mode when the original
contains photographs or text with
pictures.
❖ ❖ ❖ ❖ Photo mode
Delicate tones of photographs and
pictures can be reproduced with
this mode.
Note
❒ You can specify the original type
that is selected by default when the
power is turned on. See "2 Original
Priority" on p.74 "3 Initial Setting".
❒ The default is Letter mode.
❒ Moire patterns may occur when
you are printing from screened
originals.
❒ When using Photo mode to print
originals with both text and photo-
graphs, the text might appear faint.
To avoid this, use Letter/Photo
mode instead.
A A A A
Press the { { { { Type of Original} } } } key.
32
B B B B
Use the { { { { ~ ~ ~ ~ } } } } { { { { } } } } } } } } keys to select the
type of original, and then press
the { { { { OK} } } } key.
C C C C
Set your original.
D D D D
Enter the number of prints with
the number keys.
E E E E
Press the { { { { Start} } } } key.
Printing starts automatically after
the trial print.
Note
❒ If you wish to check the image
before printing, press the { { { { Auto
Cycle} } } } key before pressing the
ZLKS050N
{ { { { Start} } } } key, in order to disable
Auto Cycle mode. See p.17
"When Auto Cycle mode is off".
ZLKS032N
ZLKS030N

Advertisement

Table of Contents
loading

This manual is also suitable for:

Jp4500Ldd1453560dnp

Table of Contents